3 Meter Cube Smoke Density Tester [ Made in Korea ]

FESTEC’s 3 Meter Smoke Density Tester is the testing equipment measuring the smoke generated when the cable or optical cable is placed horizontally and burn under definite fire resource in the specified condition (3m3 chamber required by IEC61034). This equipment is important to measure the smoke generation from the evalue of light source

• Flash point testers Made in Korea
• Fire Testing Equipments Made in Korea
• 3M Cube Smoke Density Tester Made in Korea

Bunced Cable Vertical Flame Spread Tester [ Made in Korea ]

FESTEC’s Bunched Cable Vertical Flame Spread Tester is a series conforming to IEC 60332-3-10, KS C IEC 60332-3-21~25 (Category A~D) standards. The test measures the expansion of vertical flame to the electronically or optically vertical cable or wire using the standard ignition source while supplying a certain amount of air to a chamber of a

• Flash point testers Made in Korea
• Fire Testing Equipments Made in Korea
• IEC60332-3 Made in Korea

Single Vertical Flame Spread Tester [ Made in Korea ]

FESTEC’s Single Vertical Flame Spread Tester is included in IEC 60332-1, IEC 60695-2-4-0 & 1 standards. This test use for method requires a set volume Chamber in standardized for source of ignition in electrical or optical, make stand straight of wires or cables vertically for the vertical arrange flame spread of the

• Flash point testers Made in Korea
• Fire Testing Equipments Made in Korea
• Single Vertical Flame Spread Tester Made in Korea

IEC60754-1&2 [ Made in Korea ]

FESTEC’s IEC 60754-1&2 Tester measures gas volume of Halogen Acid (IEC 60754-1), pH concentration(PH Meter, Hydrogen ions, IEC 60754-2), Conductivity(IEC 60754-2) and etc from a wire (cable) by radiant heat in the Tube Furnace (IEC 60754-1: 800°c, IEC 60754-2: 950°c) Especially, FESTEC’s IEC 60754-1&2 is enable to test both IEC 60754-1

• Flash point testers Made in Korea
• Fire Testing Equipments Made in Korea
• IEC60754-1&2 Made in Korea

Fire Resistance Tester [ Made in Korea ]

FESTEC’s IEC 60331-11 tester is used in test conditions where the basic flame temperature is at least 750? and tests the cable exposed to the flame that needs to maintain the circuit

• Flash point testers Made in Korea
• Fire Testing Equipments Made in Korea
• IEC60331-11&21 Made in Korea

Fire Mechanical Shock Tester [ Made in Korea ]

FESTEC’s IEC 60331-12 tester is used in test conditions where the basic flame temperature is at least 830? and tests the cable exposed to flame and mechanical shock that needs to maintain the circuit

• Flash point testers Made in Korea
• Fire Testing Equipments Made in Korea
• IEC60331-12&31 Made in Korea

Water Spray Tester [ Made in Korea ]

FESTEC’s BS 6387 Tester, BS 6386 standard is belong to British, is a testing device that checks for the standard level of current in the cable, and also checks the cable’s resistance for heat and water of the

• Flash point testers Made in Korea
• Fire Testing Equipments Made in Korea
• BS6387 Made in Korea

Erosion Tracking Tester [ Made in Korea ]

Erosion Tracking Tester measures the resistance to tracking and erosion by using liquid pollutants and inclined plane specimens. This tester can be evaluated resistance to tracking and erosion of electrical insulation materials used under severe ambient conditions and has two kinds type test way which are constant tracking voltage and stepwise

• Flash point testers Made in Korea
• Fire Testing Equipments Made in Korea
• ASTM D 2303 Made in Korea
• IEC60587 Made in Korea

Spread of Flame Tester [ Made in Korea ]

IMO is used to evaluate combustion characteristics of building materials and ship materials and measures spread rate of flame, flame for ignition by distances, CFE (Critical Flux at Extinguishment) and total heat release. This test method is originated from ISO 5658-2 (Reaction to fire tests–Spread of flame- Part 2 Lateral spread on building

• Flash point testers Made in Korea
• Fire Testing Equipments Made in Korea
• Spread of Flame Tester Made in Korea

45 Degree Flammability Tester [ Made in Korea ]

45 Degree is used to evaluate compliance of fire-retardant products with fireretardant performance standards according to the combustion method, and measures combustion characteristics such as After Glow and After Flame of test specimen installed at a 45-degree angle. FESTEC 45°Flammability tests After Flame Time and After Glow Time of specimen

• Flash point testers Made in Korea
• Fire Testing Equipments Made in Korea
• 45 Degree Flammability Tester Made in Korea