CNG Cylinder [ Made in Korea ]

Specification - Product size : 20 ~ 152 liters - Storage pressure : not less than 200 bar(2,900psig) - Cylinder shape : convex - Type of cylinder : ANSI/NGV 2-1, 2-2, ISO CNG-1 & 2 - Material : High strength Cr-Mo steel - Applicates : CNG gas - Code & Standards : ANSI/NGV 2, ISO 11439, KGS, KSB ISO 11439 - Certiicates : KGS, BV, KR etc -

• Gas treating equipment Made in Korea
• CNG Cylinder Made in Korea

High Pressure CO2 System [ Made in Korea ]

Introduction The carbon dioxide extinguishing system is a fixed system to extinguish fire by smothering action with CO2. It is a most effective system for protection of machinery spaces, paint store and cargo holds along with advantages ; - As a fire extinguishing agent, CO2 is non-corrosive and causes no chemical reaction on metals,

• Gas treating equipment Made in Korea
• High Pressure CO2 System Made in Korea

ODEN WARMER [ Made in Korea ]

The water iron pot is covered with SUS 304 stainless and there is no welding line. And it can be easily cleaned and is sanitary. It is small-sized and simply operated. The case made of SUS 430 stainless steel is clean, sanitary and high quality. The heater is made of AL and the heating side is covered with silver coating, so it is not corroded and

• Electrical line heaters Made in Korea
• ODEN WARMER Made in Korea

POU Gas Scrubber (AP-HPS Series) [ Made in Korea ]

The AP-HPS scrubber is designed to overcome the shortcomings of traditional wet scrubbers, and for efficient removal of wide range of exhaust gases. It features a unique 4-chamber design and automatic chemical neutralization facility. This function ensures the capture of fine gas particles to 99.99 % removal efficiencies of both water soluble and

• Gas treating equipment Made in Korea
• POU Gas Scrubber Made in Korea

POU Gas Scrubber(AP-MPS-DP) [ Made in Korea ]

- 3 Chambers + 1 Venturi Type - Chemical Neutralization Facility for Insoluble gases ?KOH Dosing for SiH4 - Powder Control Unit (N2& Water Spin Unit) ? No Plugging ? Long Maintenance Period - High Pressure Generator ? No Blower (Fan) Certificate - Patent

• Gas treating equipment Made in Korea
• POU Gas Scrubber Made in Korea

Gas Scrubber System [ Made in Korea ]

AP-solution designs and manufactures corrosion resistant packed bed scrubbers in both Vertical and Horizontal configuration. Our scrubber system can be used for removal of particulates and water soluble contaminants including acid and alkaline gases/vapours. Packed Tower scrubber is used for the removal of hazardous gases from airstreams. It is

• Gas treating equipment Made in Korea
• Gas Scrubber System Made in Korea

VOC Abatement System [ Made in Korea ]

The Regenerative Thermal Oxidizer (RTO) destroys air toxics and Volatile Organic Compounds (VOCs) that are discharged in industrial process exhausts. The system achieves VOC destruction through the process of high temperature thermal oxidation, converting the VOCs to carbon dioxide and water vapor, recycling released energy to reduce operating

• Gas treating equipment Made in Korea
• VOC Abatement System Made in Korea

Facility Management [ Made in Korea ]

Process Exhaust Ductwork - FRP Ductwork ? FRP Duct & Pipe FRP Tank & Cover FRP Lining, etc. ? FM Approved FRP Duct (FM4922, FM4910) - SUS Coating ECTFE (FM Approval) ? ECTFE Coated SUS Duct as Fume and/or Smoke Exhaust Duct for Use in Clean Rooms Equipment Utility Hook-ups Gas/Chemical Delivery System - Basic design & Installation of Bulk Gas Line

• Gas treating equipment Made in Korea
• Facility Management Made in Korea

HEAT/COOL THERMOSTATE [ Made in Korea ]

Company Introduction In industral socienties in the 21st century where competition becomes hotter and thd importance of automation, high-speed, high-quality, and precise washing process is more imphasized, the Company has satisfied the customers since its establishment through concentrated R&D of ultrasonic wahing and through manufacturd of

• Heater treaters Made in Korea
• HEAT/COOL THERMOSTATE Made in Korea
• DSP cooler Made in Korea
• Waste Acid Disposal Cooler Made in Korea
• Teflon Heat Exchanger Made in Korea
• PTFE Moldings Made in Korea

Annealing M/C [ Made in Korea ]

Introduction Summary Heat treatment device to increase strength and hardness by heat treating injection molded plastic Test items 1. Assessment of plastic strength 2. Assessment of plastic hardness 3. Assessment of plastic abrasion resistance Assessment items 1. Heat treatment of plastic in the combination parts of

• Heater treaters Made in Korea
• Annealing M/C Made in Korea
• fuel saver Made in Korea
• DPF Made in Korea
• Fatigue testers Made in Korea
• Electric shaker Made in Korea
• hydraulic tester Made in Korea