DHS 988 Based on ISUZU 1TON R.H.D TRUCK [ Made in Korea ]

DIMENSION (L x W x D) : 3165 x 1745 x 1715 Application Vehicle : Not less than 1MT Payload Truck Max. Working Height : 9.2M ( from ground to the platform top) Max. Side reach : 6.2M Rotation Device : Reduction Gear by hydraulic Motor Swing angle/Speed : 340 / 30sec ( Non-continuous swing) Operation method : Wire proprtional control transmitter

• Crane vehicles Made in Korea
• DHS 988 Based on ISUZU 1TON R.H.D TRUCK Made in Korea

DHS WONDER 210 [ Made in Korea ]

Telescopic crane of 14m working height. DH WONDER 210 is the very convenience of sign-board/bill-board work, DH WONDER 210 is popular crane among our products. Using Signboard/Billboard Carrying platform, customer moves his truck to job site carrying sign board on the boom and the distance between upper carrying platform and lower carrying

• Crane vehicles Made in Korea
• DHS WONDER 210 Made in Korea

Auger Crane (DH SUPER 3000) [ Made in Korea ]

As DH SUPER 3000 Auger Crane has articulated boom of its 1st and 2nd stage booms, it has wider and dipper digging range as the shown above pictures. Unlike other auger crane, DH SUPER 3000 digs a hole so close to the chassis and it is easy to dig a hole in the declined hill also. KT Corp in Korea is using DH SUPER 3000 to install and maintain its

• Crane vehicles Made in Korea
• Auger Crane (DH SUPER 3000) Made in Korea

ISUZU 1TON R.H.D TRUCK [ Made in Korea ]

DIMENSION (L x W x D) : 3165 x 1745 x 1715 Application Vehicle : Not less than 1MT Payload Truck Max. Working Height : 9.2M ( from ground to the platform top) Max. Side reach : 6.2M Rotation Device : Reduction Gear by hydraulic Motor Swing angle/Speed : 340 / 30sec ( Non-continuous swing) Operation method : Wire proprtional control transmitter

• Crane vehicles Made in Korea
• ISUZU 1TON R.H.D TRUCK Made in Korea

BOOM REST BRAKET [ Made in Korea ]

It prevents self rotation of boom when the truck chassis is being

• Crane vehicles Made in Korea
• BOOM REST BRAKET Made in Korea

Ship manufacturing crane (Goliath Crane) [ Made in Korea ]

Introduction Its actual name is Gantry Crane but the portal type of crane with legs supporting its girder with a capacity to handle over 300tons is called as Goliath crane. It is mainly used for lifting parts or the whole large blocks in the large shipbuilding

• Crane vehicles Made in Korea
• Crane Made in Korea
• Goliath Crane Made in Korea
• Gantry Crane Made in Korea
• Overhead Crane Made in Korea
• Jib Crane Made in Korea

Ship manufacturing crane (Level Luffing Crane) [ Made in Korea ]

Introduction This equipment is usually installed on the rails like gantry cranes, which handles heavy weights moving mainly along the inner wall. It can rotate 360° and has a free level control on the boom. Therefore it has an advantage to load/unload all kinds of cargos hence are the most popular crane used for the hull back-ups in the

• Crane vehicles Made in Korea
• Crane Made in Korea
• Goliath Crane Made in Korea
• Gantry Crane Made in Korea
• Overhead Crane Made in Korea
• Jib Crane Made in Korea

Ship manufacturing crane (Traveling Tower Crane) [ Made in Korea ]

Introduction This crane differs from the standard tower crane mainly used in the construction sites by its fixed movement by being installed on the rail. Hence it can lift large weights and specially has a large working radius. Our company and Manitowoc Crane Group (Ex- potain), a tower crane manufacture started in 1928, France, supplying

• Crane vehicles Made in Korea
• Crane Made in Korea
• Goliath Crane Made in Korea
• Gantry Crane Made in Korea
• Overhead Crane Made in Korea
• Jib Crane Made in Korea

Normal crane (Gantry Crane) [ Made in Korea ]

Introduction This is the most common crane used in open factories which is usually installed on the rail for its travel and it also can move transversely. This device is usually installed as a portal type in standard factories or outdoor workshops which transports and moves steel plates or steel structures, etc. It is constituted of girder,

• Crane vehicles Made in Korea
• Crane Made in Korea
• Goliath Crane Made in Korea
• Gantry Crane Made in Korea
• Overhead Crane Made in Korea
• Jib Crane Made in Korea

Normal Crane (Overhead Crane) [ Made in Korea ]

Introduction This is usually named as a roof crane and it is typically used in the indoor-type factories such as dockyard, power plants, steel mills, machinery factories, etc. and it has various types according to different weights and

• Crane vehicles Made in Korea
• Crane Made in Korea
• Goliath Crane Made in Korea
• Gantry Crane Made in Korea
• Overhead Crane Made in Korea
• Jib Crane Made in Korea