-
The gantry crane is mainly installed at open area depending on the work conditions of a site. Characteristically, it is not restricted in its capacity, height and width. It can help transport and load various materials. It is mainly manufactured in large size. It is advantageous as it can utilize a wide space.
ex)50TON
S/P30M*T/L55M
Bando
-
AL 34CBM Bulk Trailer
ICP co.,ltd., can develop any products clients need.
If you have any question about our products, request for tell us anytime.
We will always welcome you opening the door
-
Introduction
? Model Name : iREMO 2K
? Type of RF : PLL
? Remote Distance : 30 ~ 150 M
? Protection : IP 55
? Tx Power : 2 x 1.5V AA Battries
? Rx Power : DC 12~24V (Option 48V), AC 100~240V 50/60Hz (Option for
-
PROVISION
-
Quick Snap Swivel
- Size : 5/0
- Breaking
-
Description
The girder (the main body) is manufactured with two units. The hoist itself is manufactured as a double type, and is mounted onto the upper part of the girders, so it is stable and solid and applicable for high tonnage work. if the tonnage is 5 tons or heavier and the span is longer than 20m, the hoist crane should be manufactured
-
ICP co.,ltd., can develop any products clients need.
If you have any question about our products, request for tell us anytime.
We will always welcome you opening the door
-
-
Purpose of Device that establishment and installation on the sea for carry out an experiment and cables establish on bottom of the sea. This device have been delivered to Korea Coast Guard and KT
-
Stainless steel 8-type Swivel
- Size : 3S, 4S
- Breaking Strength
- S/S 8-type Swivel 4S :
-
Description
The girder (the main body) is manufactured with one single unit, so it can traverse sing the I-beam while hanging onto it. This is mainly applicable for the work objects weighing 3 tons or lighter and for the span measuring 15m or shorter. Compared with the double girder hoist crane, this product costs less. However, there are some
-
ORDER OPTION
-Hydraulic adjustment gooseneck height funtion
-Pendulum axle
-Extend Length/Width
-Installation hydraulic
-
-
The purpose of the Helicopter Securing and Traversing System is to secure and safely traverse sea borne helicopter from the landing area to either of the twin hangars safely along a system of rails secured flush to the deck and vice-versa. The system is installed on the quarterdeck of the ship. This system has been ordered for KDXIII(1, 2, 3rd
-
Stainless steel Crane Swivel
- Size : 3/0, 4/0, 5/0, 6/0, 8/0
- Breaking Strength
- S/S Crane Swivel 3/0 :
-
ICP co.,ltd., can develop any products clients need.
If you have any question about our products, request for tell us anytime.
We will always welcome you opening the door
-
Introduction
Instead of the trolley and hook of normal gantry crane or electric crane to lift the articles, it is installed with a vacuum system which can lift the steel boards or articles using suction force of the vacuum.
This device has a quick response and does not require of oil or electricity for its run and also does not produce
-
Introduction
KALMAR FORKLIFT
DC 28-1200LP
28TON LIFTING
-
Purpose of Device that establishment and installation on the sea for carry out an experiment and cables establish on bottom of the sea. This device have been delivered to Korea Coast Guard and KT
-
Fishing Hooks
(Tuna Circle Hooks / Tuna Hook)
Tuna circle hook(420J2 Stainless steel)
EZ-bait hook(High Carbon steel)
Tuna hook with ring(420J2 Stainless