-
Water supply pipe extrusion lines up to 1200mm o.d
Gaseous pipe extrusion lines up to 630mm o.d
Floor heating pipe extrusion lines up to 35mm o.d
Applicable resin PB and PERT(Polyethylene raised temperature)
Hot & cold water supply pipe extrusion lines up to 63mm o.d
Sewage pipe extrusion lines up to 30000mm i.d
Any type of plastic pipe
-
Sewage pipe extrusion line Complete production lines for sewage pipe extrusion WONIL offers tailor-made solutions for sewage pipe extrusion lines with its new modular single screw extruder. Combined with the optimized screw geometry, the machines of this series offer an excellent melt homogeneity. Sewage pipe extrusion lines of WONIL are designed
-
SDP-60
- To be installed on the upper part of the clean room
- To be installed on the front side of the clean booth
- To be installed in an anti-static section of a wide unit area
- To be installed for the process of maintaining ion balance
- Can be custom-made in the sizes desired by the users
- Standards: User dimension(W) x User
-
PIPE EXTRUSION LINE
THIS MACHINE IS FOR PRODUCE RUBBER & PLASTIC PIPE WITH USE PP,PE,ABC,PVC,PC,PA
Features : LOW NOISE,HIGH EFFECTIVE,PRECISION TECHNOLOGY
Spec : SINGLE AND TWIN SCREW
-
Plastic pipe welding machine The plastic pipe welding machine are designed for the welding of PE pipes and designed to fabricate fittings like T-pieces 90° by joining pipe segments, with the help of special jaws.
Range of application up to Ø 1200mm(SDR 11 Standard) Customer benefits Long service life Accurate welding force Safe and
-
SDP-35
[Use]
- Free spray (joint hose), use for magnet/table
- For the process of LCD, cell phone case, and etc.
- Possible to work with FOOT S/W and sensor
- Possible to control the amount of air by using valve
- Air pressure: 2~6kg/?
- Standard: Hose 500mm/ Stand F100mm X 25T
-
1. Thermal Module (Component Part in System)
- Product Design: Provides with differentiated design of products that comply with customer identity
- Best thermal design: Provides with optimal radiation designing by considering product design, radiation efficiency, productivity and cost
- Test & analysis& approval: Conducts thermal test and
-
Band Saw Machines for plastic pipes are fully hydraulic enabling cutting of pipes up to 2000mm and are designed to make angular cut, featuring a wide range of angles. Range of application up to Ø2000mm Customer benefits Adjustable for angle cutting 0-45°, in 1°-increments Perfect speed for cutting PE pipes Easy to use, fast and precise Single
-
SDP-30
[Use]
- Easy to neutralize static electricity locally
- Eliminate alien substance and static electricity of the product of transmission conveyor
- Eliminate alien substance and static electricity of the plastic product
- Possible to control the ion balance
- Possible to fixate and install inside a complicated machine
- Standard: F30
-
1. Thermal Module (Component Part in System)
- Product Design: Provides with differentiated design of products that comply with customer identity
- Best thermal design: Provides with optimal radiation designing by considering product design, radiation efficiency, productivity and cost
- Test & analysis& approval: Conducts thermal test and
-
Introduction
This product is a round saw cutting machine that has a very powerful cutting capability. Applications: Angle, all kinds of pipes, channels, nickel silver
Types;
A. Wet process round saw cutting machine
1.Cutting oil is used.
2. This product doesn’t raise dust.
3. Sections are clean.
4. This product doesn’t
-
Features:Pup Joint is ideal tool for handling standard or sour gas well servicing fluids in a wide size range from 1”~3”. The available working pressure is up to 15000psi.
Regular length of pup joint is 1ft to 20ft.
It can be used to replace some of major company’s pup joint.
Spec:Up to 15,000psi cold working pressure; 2, 3-inch bore
-
? SDP-50
- Use of compressor air. Effective anti-static distance is 1m
- Ideal for removing static for film sheeting works.
- Ideal for removing static for fiber, paper-making and printing machines.
- Ideal for removing static after being installed in a restricted area.
- Can be manufactured in the sizes as desired by users
- Air flow can be
-
Introductioin
Linepipe : API 5L Gr. B - Gr. X70,
Available from 1/2" to
-
Introduction
In case of the ``one-touch pipe connector,’’ we changed its metal pipe connector and warm water distributor to plastic engineering product, so this piping material changes the construction culture with economic and effective work.
1. Metals tend to corrode and cause water leakage, so we have prolonged the life of buildings.
-
? SDP-45
- Ideal for removing static and dusts after being installed at the top of the painting and automation lines for mobile phones.
- Can be used for air showering
- Powerful spraying & articulated hose type/general type
- Air flow can be adjusted within the range of 2~6kg/? due to the attached speed valve
- Standards: Dimensions applied
-
CPVC
Formulated through chlorinated polyvinyl reaction, CPVC is the resin drastically improving the heat resistance, impact resistance, mechanical strength and pressure resistance over the commercially and widely available PVC.
Features
UL listed
· Excellent corrosion resistance and anti-chemical strength
· Excellent heat and pressure
-
Introduction
1. Pipes with PVC coating to stainless wrinkle pipes
2. Bending is easy and can be easily worked and connected even in narrow spaces.
3. Piping materials that pose no danger of gas leakage even when the ground sinks or there is vibration
4. There are no connecting parts (fittings are not necessary) and construction costs are
-
? SDP-40
- Ideal for removing static for film sheeting works.
- Ideal for removing static for fiber, paper-making and printing machines.
- Ideal for removing static after being installed in a restricted ares.
- Can be manufactured in sizes as desired by users
- Easy to install and operate
- B.K.T : Can be manufactured according to the
-
Steel Pipes
- PARTS RELATED TO DEFENSE
Steel Pipes of Nokwon are manufactured for military tanks, especially for military defense. They come in 2 shapes; one less crooked, the other more crooked.
We can develop any products clients need.
If you have any question about our products, request for tell us anytime.
We will always welcome you