-
As a sunshade product for window covering, not only be limited to sun block , but also has a function of interior effect and high efficiency of energy by dint of ultraviolet rays blocking and furthermore these products are combined with unique and beautiful designs by using of adjustment the height and light guide control without
-
-Basic channel : 1 up to 3channel
-Constant current control type optimized for LED lamp
-I/O communication control for volume
-On/Off control by DC voltage
Features:According to the customer request design production
Spec:Reference
-
LED STREET LIGHTING LAMP
DC12V - HLL-S050
Input voltage : 10.7V
Incoming current : 4.68A
Input power : 50W
Speed of light : 4255lm
Color Temp : 5801K
Color rendition : 74Ra
Efficiency : 75.1lm/w
Average illuminance : 33.2Lux
DC12V - HLL-S070
Input voltage : 11.3V
Incoming current : 6.21A
Input power : 70.1W
Speed of
-
Introduction
DC12C-12300
1.INPUT VOLTAGE:DC12V
2.OUTPUT VOLTAGE:DC 0V-12V
3.POWER MOTOR:6W-300W
4.SPEED
-
Model SOL-POWER (SP-12 & SP-24)
Use
Obtained from solar energy to recharge as the most appropriate control device
Rating
• 12VOLT, 24 VOLT • SP-1212 12 VOLT 12AMPS • SP-1230 12 VOLT 30AMPS • SP-2412 24 VOLT 12AMPS
Example of application
•Home system
•Street and pathway lighting,
•Parking area,
•Bus station and
-
? Roller for Converyor system
? Work-Roll
? Roller for Transfortation
On top of price and quality, we’re ready to provide you with customer tailored service that best suits your needs and taste. You can trust on our solid system and rapid work process that will respond to your initial inquiries real-time and ensure optical
-
Introduction
Product Description
1. Protecting step-out minimizes vibrations in motor and keeps high torque at high velocity.
2. Precision control by controlling the drivers with low noise and less vibration.
3. With digital control method, easy to control current by setting the current value during
rotation or stopping.
4. Easy to
-
[Effect of SKEW PREVENTIVE PUSH ROLLER]
?It fixes skew phenomenon and reduces ore dropping.
?Roller is covered with synthetic rubber, so that the belt cannot be damaged.
?It is installed on the exterior of the tail side, so that it is possible to change the angle while the machine is running after a visual check.
?Installation is not limited
-
Principle of generator controllers Hybrid Booster, depending on the voltage generator voltage is generated. To boost the battery is charging.
Hybrid PWM Controller is made to PWM charge most safely by controlling the wind turbine energy and solar panel energy at the same time.
Especially, Volt Regulator is controlled with PWM method to prevent
-
Our composite products are ultralight and have high stiffness compare to exist metal materials.
- Composite products are excellent in ulralight, high stiffness, critical revolution,
density, chemical resistance and so on
Features
Strength high stiffness (10times strong than metal, iron)
Density (3times lower than AL)
Vibration
-
• Reverse Rotation Prevention
• Quick and easy fix!
• 180° swivel head for left handed use
• Computer OMR CARD, Word Processor, FAX. Can be used to modify all the
-
This product is using for LED Illumination control for machine vision optics and the product can be configured for various types of channel.
Features:-According to the customer request design production
-Basic channel : 2 up to 16channel
-Constant current control type optimized for LED lamp
-RS-232 communication control for volume
-I/O
-
Performance improvement factors
- Dual mode BMS, and charging/discharging efficiency improvement
- Automatic control of cloudy days (very little sunlight) according to SoC
- Automatic control of ON/OFF and ON current
Environment adaptation factor
- Allows for charging during the winter season
- Realization of mood lighting and color
-
Introduction
DC24C-24600
1.INPUT VOLTAGE:DC24V
2.OUTPUT VOLTAGE:DC 0V-24V
3.POWER MOTOR:6W-600W
4.SPEED
-
Introduction
¦ Outline
¦ Features
- RS-485 Communication connected each Sensor Controller, Display, Main server, etc.
-RS-485 Communication, Diagnostic and setup available
¦
-
Center Cutter
Face Cutter
Gauge Cutter
Disc Cutter / Roller Bit &
-
GRANT SUPER GREASE EP NLGI No.2 uses the highly refined mineral oil and lithium soap to manufacture.
It is a product with improved load resistance capability, waterproofing capability and mechanical stability.
* Packages : Non-returnable 180 kg drum & 15 kg pail
Features:It is appropriate for the bearing and lubrication point of automobile
-
[SKEW PREVENTIVE I-TYPE ROLLER]
?This product is designed to prevent skew for short and two-way conveyor belt.
[Effects of SKEW PREVENTIVE I-TYPE ROLLER]
?It shows outstanding performance for two-way conveyor belt.
?It shows outstanding performance where automatic aligning system cannot function properly owing to short working section.
?It
-
Hybrid PWM controller, When the generator voltage higher than the battery voltage the device is controlled by PWM.
Hybrid PWM Controller is made to PWM charge most safely by controlling the wind turbine energy and solar panel energy at the same time.
Especially, Volt Regulator is controlled with PWM method to prevent the shortening of the
-
Detailed Product Description
MTS derma roller Mi-roll
*Feature: Biocompatible microneedle derma roller, Anti-Hair Removal, Anti-Puffiness, skin rejuvenation
MTS derma roller Mi-roll
About Mi-Roll
Transitional metal made Micro Needle Roller most cause many side-effects such as skin irritation.
It is made of nontoxic polymer which is