-
This chemical agent has a strong cationic character, so can gather and combine the fines, fillers and some additives in process water. When you use this, you can decrease a load of water treatment section.
Our products are supplied as Emulsion type, so can affect it as a more powerful chemical agent for a water treatment.
This emulsified
-
The RTU which is installed to monitor and control electric power-related facilities scattered in industrial sites provides information on operation of those facilities in connection with the upper dispatching center and controls those facilities following directions of the upper system.
The RTU consists of the main treatment unit to store and
-
Model
DWP-816S / Floor Stand
Dimension
300(W) x 365(D) x 1,000(H)
Electric Power
Ac220V / 110V, 50-60 Hz
Cold Power Consumption
100 W
Hot Power Consumption
450 W
Compressor
LG Electronic, R134a 32 g
Hot Cock
Safety faucet for children
Water Tank
-
DOLKI CERAMIC BALL
BY DOLKI CERAMIC TECHNOLOGY AND KNOW-HOW OVER 10 YEARS IN WATER TREATMENT INDUSTRY
FOR NATURAL FRIENDLY WATER TREATMENT
ACTIVATING WATER MOLECULE / REMOVE RESIDUE CHLORINE / PH CONTROL / ANTIBACTERIAL EFFECT
Production Line
1. Mineral Balance Ball (UD-0110R/ UD-0105R)
2. Ion Balance Ball
-
Introduction
PNRT(high efficiency treatment for Phosphorus & Nitrogen Removal by Taerim Industry Co.,LTD.) supplemented the faults of and improved existing Bardenpho, and it is a biological advanced treatment technology that supplies fixed microbe carriers (nitrification media) to the rear anoxic tank and aerobic tank to increase the volume of
-
Introduction
Y-PNR (Yeongam-Phosphorus & Nitrogen Removal) is supplemented the faults of and improved existing Bardenpho method, and it is a biological advanced treatment technology that supplies the fixed microbe carrier (nitrification media) into the aerobic tank which is a part of the bioreactor comprised of anaerobic tank, anoxic tank, and
-
Introduction
Waste water Treatment Method for Eliminating Nitrogen (A2O4 Method)
Sewage and Waste water For the waste water treatment device for eliminating nitrogen (A2O4 method), the treatment sections constituted with a set of anoxic tank
and 2 sets of aerobic tanks are connected in series, the anoxic tank of each treatment section handles
-
Introduction
Continuous online monitoring and control for any aqueous solution to accommodate a range of sensors
Description
The SS (Suspended Solids) analyzer (DWA-3000A-SS) Wall mount microprocessor has been built
and designed to provide years of trouble free operation.
It is designed to be mounted on the wall or pipe stanchion.
This SS
-
In water treatment the mian processes used are demineralization, softening, ion exchange,
gravity and pressure filtration. willscreen wedge wire screens are used in these processes to
collect or distribute the treated liquid, to retain the treatment media, to filter solids,...
The main advantages compared to perforated plate, wire mesh or
-
Model
DWP-816S / Floor Stand
Dimension
300(W) x 365(D) x 1,000(H)
Electric Power
Ac220V / 110V, 50-60 Hz
Cold Power Consumption
100 W
Hot Power Consumption
450 W
Compressor
LG Electronic, R134a 32 g
Hot Cock
Safety faucet for children
Water Tank
-
Lego-type products that can be assembled and performance upgraded
by adding parts at any time in water treatment flow units.
Configuration of the product
- Consists of three segments, BioL (low-priced), BioP (medium-priced), and BioM (high-priced).
- It consists of separate accessories, such as strainers and additional filters, apart from
-
GloEn-Patrol? is a combined treatment system taking advantage of Filtration and UV irradiation, the most environmentally friendly and optimally designed solution for every kind of vessel to install and operate.
GloEn-Patrol? is a combined treatment system taking advantage of Filtration and UV irradiation, the most environmentally friendly and
-
Features
- The non-point Pollutant Abatement Facility is a method for discharging the water in the filtration tank. Treatment efficiency of non-point pollutants is maintained for a long term, and drainage will be smooth even though the inflow amount would be large.
Features:
- Resistant to external conditions such as flow rate and flow
-
Features:
- The CW-SD type is an aerobic biological treatment method, which is an advanced method of CW-S type. In the conventional aeration device, the air supply and the air supply of equal conditions can maximize the required oxygen absorption of the for-treatment water.
Features:
- Resistant to external conditions such as flow rate
-
Features:
- The CW-S type wastewater treatment process is a method of decomposing and treating organic matters present in wastewater. Contact aeration tank is filled with contact agent and sufficient dissolved oxygen is supplied by aeration to treat the microorganisms cultivated on the surface of contact material.
Features:
- Resistant to
-
Features:
- It is a sterilization method that can obtain physical effect different from existing sterilization method. It uses 253.7mm wavelength which has the best sterilizing power among 100mm ~ 280mm sterilization wavelength, destroys nucleic acid (DNA) of various bacteria such as bacteria and viruses.
Features:
- Excellent effect on
-
Features:
- It is a sterilization method that can obtain physical effect different from existing sterilization method. It uses 253.7mm wavelength which has the best sterilizing power among 100mm ~ 280mm sterilization wavelength, destroys nucleic acid (DNA) of various bacteria such as bacteria and viruses.
Features
- Excellent effect on
-
Features:
- The CW-TM type is a multi-stage wastewater treatment system. It is a technology to efficiently purify wastewater. It is a purification treatment method for separation of impurities and control of flow rate, which is an alternative characteristic to change in inflow volume.
Features:
- Resistant to external conditions such as
-
Features:
- The KHBNR Sewage Treatment Method is anaerobic to multistage process. A method of removing organics, nitrogen and phosphorus by using microorganisms as standard activated sludge process., which is equipped with stable discharge of water at low concentration, high concentration and low water temperature.
Features:
- Resistant
-
Features:
- The DMBR Sewage Treatment Method is anaerobic to multistage process. It is aimed to convert the components capable of dissolving and particulate biodegradation into a final product. Also, It captures suspended and non-sedimented solids as biofilm, and has the function of converting or removing nutrients
Features:
- Reduction