-
It is the first process during a construction waste recycling plant and a plant for rocky mountain as unit crushing an A, B class with approximately 200-2000 size and nasty concrete
-
Introduction
Right for Wood Doors
Power
DC 12V
Door Position
COM, NO, NC Output
Strength of Lateral Pressure
900kg Force
Dimension (W×H×T)
124×30×31
-
Introduction
Main Bearing Support for marine engines and Cylinder Head for high velocity engine that are produced by the special manufacturing processes.
Material : S17F
Weight :
-
It is the plant which has produced to regenerative aggregates with 200~300mm from the nasty concrete with the desk size (approximately 1~2m) in the process for the construction waste material After, it is produced the regeneration aggregate with approximately 13~40mm through the cone crusher Finally, it is plant which produces a regeneration fine
-
Introduction
RF Card (125KHZ or 13.56MHZ) or P/W
Power
DC 12V/Max 150mA
CPU
8bite Microprocessor
RF ID User
1,000 people
Dimension (W×H×T)
120×120×30
-
Introduction
We supply principal parts of railroad passenger cars such as Journal Box, Center Pivot, Mono Links and so on to the manufacturers in domestic and abroad with our experienced and accumulated technologies.
Material : AAR M201 Gr.C
Weight :
-
These process are a PLANT to pick the aggregates from the rocky mountain. It is the PLANT which manufactures sand after aggregate which was gathered from the rocky mountains is crushed, and then processes the nature sand with a similar
-
Introduction
Right for Access control, Parking, Water Supply, and etc.
Memory
ROM 4Mbite, RAM 8bite
Communication
TCP/IP, RS-485(19,200bps)
Power
AC 187 ~ 253V 60Hz
Access of Local Control Unit
63ea per 1 main control unit
Access of Main Control Unit
64ea per 1 PC
-
Introduction
We supply principal parts of railroad passenger cars such as Journal Box, Center Pivot, Mono Links and so on to the manufacturers in domestic and abroad with our experienced and accumulated technologies.
Material : AAR M201 Gr.C
Weight :
-
PTE bucket, boom pins are designed to maintain accurate and durable connection in Boom and bucket under the most fatigue conditions while it operates. It is made with carbon steel for most of excavators, wheel loaders. It’s durability depend on appropriate thermal treatment,high quality
-
Introduction
1. Auto re-lock function
2. Function of additional registration and cancellation of key
3. Perfect security to be provided even if touch key to be lost
4. Convenient one-touch method
5. Automatic locking function
6. Alarming by checking invasion
7. Various methods of unlock [Hand key, Safe Key, Card, Pin number]
8. Pre-notice
-
Introduction
We supply principal parts of railroad passenger cars such as Journal Box, Center Pivot, Mono Links and so on to the manufacturers in domestic and abroad with our experienced and accumulated technologies.
Material : JIS G5101 SC450
Weight :
-
The most important criterion for the idler is the hardness of the surface, accurate machining, wear resistance. Its components like shaft and floating seals are also a bigger bonus in going to harder railing surface. Recently it tends to be one simple technique which is the light, compact, and
-
-
Introduction
1. Auto re-lock function
2. Function of additional registration and cancellation of key
3. Perfect security to be provided even when touch key to be lost
4. Convenient one-touch method
5. Automatic locking function
6. Alarming by checking invasion
7. Various methods of unlock [Hand key, Safe Key, Card, Pin number]
8.
-
Introduction
Quality parts of the equipments used at the offshore exploitation sites of Oil & Gas.
Material : ASTM A148 Gr.90-60
Weight :
-
PTE track PTE track shoe material and its hardnesss is controlled by the high standard OEM specifications. We are assinged to develop any models by customers individual demand. According to different applications, track shoes are available with single, double, and triple
-
-
Introduction
Semi-machined or completely machined parts of Valve & Pumps for domestic and overseas markets.
Material : ASTM A217 WC6
Weight :
-
Introduction
Quality parts of the equipments used at the offshore exploitation sites of Oil & Gas.
Material : ASTM A148 Gr.150-135
Weight :