Ultrasonic Soldering Machine (MS-2020H)

1. Enable successful soldering hard-solder-materials such as Aluminum, Ceramic, Nickel, Titanium etc.

2. Reduce production cost

Enable reducing production cost because of replacing Cu-wire with Al-wire. (over 80% reducing for cost)

Reduce processing line that you do not need fluxing, flux-cleaning process and any other preliminary processing.

3. Reduce rate of defective product

Reduce rate of defective solder joint due to ultrasonic vibration.

No corrosion because of No Flux soldering.

Vibration energy penetrates solder into very fine space so that perfect sealing is achieved.

[Features]

1. Successful Soldering of Aluminum, Nickel, Titanium, Glass, Ceramic and Hard-to-Solder Materials that are known as impossible to be soldered in conventional soldering method

2. Ultrasonic soldering machine does not require Flux ( No Flux soldering )

3. Reduction in equipment cost and production cost due to none necessity of process related with flux.

4. Due to successful Aluminum wire soldering, manufacturers can replace expensive cooper wire with inexpensive aluminum wire in producing their motors, transformers, rectifiers, electrical filers and other coil products. ( Cost saving about 70 % )

[Spac]: refer to attached specification

1

Model No

MS-2020H

2

Ultrasonic Frequency

20 KHz ± 1 KHz

3

Maximum Output

2,000 Watt

4

Temperature Range

150 - 350?

5

Heater

Tubular Heater

6

Heater Output

500 Watt

7

Main Power

220V / 50-60Hz

8

Ultrasonic Generator

Size

435(W) * 600(L) * 140(H) mm

Weight

20Kg

9

Ultrasonic Soldering Pot

Size

189(W) * 528(L) * 200(h) mm

Weight

30Kg

10

Temperature Controller

Size

250(W) * 320(L) * 140(h) mm

Weight

5Kg

11

Features

- Full Digital Control

- Ultrasonic Amplitude Adjustable : 10-100%

- Auto Frequency Tuning : 20kHz +/- 1 kHz

- Programmable Welding Time and Energy

( 10 memories for welding condition )

- Ultrasonic Load Meter Scale

- Soldering products manually

- No Flux soldering

12

Available Soldering Materials

Aluminum, Nickel, Molybdenum,

Copper, Glass, Nonferrous metals