Laser Birdie Putt, a put practicing equipment

Introduction

It will help you correct your putting practice as you can directly check your own putt swing while looking at the laser.

1. You can check the back/follow-through swing trajectory for any shaking and correct it in order to allow you to practice in a stable pendulum motion

2. On the impact moment, you can check the opening and closing of the putter face, helping you to improve the skill of hitting the ball into a straight line.

3. It will help enhance your sense of putting distance in a consistent manner by using the distance adjustable matt.

4. It is the best product to help you gain basic golf skills, like enhancing your concentration and preventing the head-up situation.

5. It can be used for all kinds of putters.

6. It will allow you to practice in a tight area without a matt.

How to usee

Practicing in a pendulum motion

If you practice moving along the straight line of the laser beam during the back/follow-through motion, you can get yourself accustomed to the pendulum motion, helping you stabilize into your best putting posture.

Practicing a putt in a straight line

When you hit the ball, you can check the state of the putter face, helping you get used to putting in a straight line.

Training for gaining a sense of distance

As you can use a distance adjustable matt to help you practice a certain swing width, so you will gain confidence in putting as you learn to correctly hit a ball into a certain distance.

How to mount

1. Push down the laser pointer from the above.

2. Shift the putter fastening nut to the right side and hang the body of the Birdie Putt at the lower part of the shaft.

3. Move the hanged the Laser-Birdie Putt up the shaft up to a point where the pi is correctly fitted.

4. Adjust the putter face and the Laser-Birdie Putt’s body into the numerical ‘11’-shaped formation, and then fasten the putter fastening nut.

5. Fix the widthwise section after setting the practicing distance by holding and turning the bottom of the section where the laser pointer is installed. Fix the lengthwise section after setting it at the center of the putter face line. Do this by holding and moving up and down the widthwise moving and fastening combined nut that has a putting logo