Remarks : 1.) QF1 must be ABB brand name “ANYSES”
Energy Saving Devices specification :
Model
Capacity
75KVA 0k
Range of input voltage
(3-phase-4-wire-system)
380V + 10% line voltage 340-418V Phase voltage 195-241V 0k
Output voltage
(3-phase-4-wire-system)
380V + 5% Adjustable (We need to set up at around 211VAC)
ok
Accuracy of voltage stabilization
±1%-5% Adjustable ok
Frequency
50Hz ,60HZ ok
Insulation resistance
=5MO ok
Noise
<55dBok
Votage regulation mode
Independent phase regulation OK
Waveform distortion
No additional waveform distortion OK
Efficiency
=98% 0K
Delay time
4~7s (Over-voltage and Under-voltage protection) OK
protection of enclosure
IP21 (Indoor) OK
Insulation and thermal
endurance class
Class H OK
Wire system
3-phase – 4-wire- system OK
Method of voltage regulation
Regulation transformer with servomotor and steel rope OK
Material of package
wooden packing
Efficiency
>98% OK
Color of housing
Beige OK
Electrical safety
CE
Surge Protection
40KA OK
Display
1.)Multifunction meters display output parameter (AMPS, VOLTS, KW, KVA, KWH, KVAR,PF), must be including internal memory and RS 485 interface. (ENTES model MPR-60S
2.) Lamp indicators for power on OK
3.) Lamp indicators and Buzzer with reset button for fault. OK
Ambient temperature operating
-20 °C to +45 °C OK
Altitude
<1000m OK
Relative humidity
<90% OK
Manuel By-pass
In case of failure or maintenance, manual by-pass can be done by an operator OK
Auto-bypass function
The auto bypass can operate automatically, when the ESD faults happens. There is a switch on the control panel, which
can switch to two functions, manual-bypass and auto-bypass.OK
The output OV/UV protection
the protection unit will auto bypass and automatic return when normal situation (Auto-bypass mode), the protection unit will shutdown and alarm (Manual-bypass mode) OK
The input OV/UV/Phase Lack protection
the protection unit will auto shutdown and automatic return when normal situation (Auto,Manual bypass mode)OK
The Short circuit protection
Fuse protection with MCB OK
The Over load protection (last 10 Sec)
the protection unit will auto shutdown with alarm (Auto,Manual bypass mode)OK
The overheat Protection
<}0{>In case the interior temperature of the ESD exceeds 40 °C, cooling fans are activated and ensures that the Energy Saver is cooled.<0} {0><}0{>andNAnd if exceeds 80 °C for any reason such as high ambient temperature, overload of the energy saver, malfunction of fans, etc., the ESD will shutdown and alarm upon activation of overheat protection. OK
The malfunction protection
the protection unit will auto bypass and automatic return when normal situation (Auto-bypass mode), the protection unit will shutdown and alarm (Manual-bypass mode) OK
Other functions
Safe start, ZigZag winding OK
Product Warranty
3 years OK
Remark
Contactor, switches, wires, and other electrical component must be according and passed IEC low voltage standard.
Product Cost (CIF)
USD 2,800$
Share ESD(Energy Saving Device) in Social Media