Dynamic Gas Spring

Dynamic Damping TypeThe gas spring is usually mounted on the tail gate or hood/bonnet, thus makes easy of lifting/lowering the coverlet. The gas spring is consisted with pressure tube(Cylinder), piston rod(Shaft), oil seal and other components. Overview The feature of dynamic gas springUnlike conventional hydraulic damping type by controlling piston orifice as oil passage, the dynamic gas spring give user very soft damping feeling and closing/open effort. It is available to set up the extension and compression speed of the piston rod for optimized usage condition by varying the groove parameter. How to dynamic damping workIn this type of gas spring, piston does not have orifice in order for gas itself to run through the channel which is slotted on Speed the cylinder surface. Demonstration of dynamic gas spring when it is mounted on the tail gate Feature Various range of application:From the furniture to automotive Merit of gas spring1. Sustaining of the constant elasticity change rate even in the high reaction force and long stroke.2. Compact design and appearance.3. Easy mounting and installing in any application at any position.4. Automatic operational dampering function without any additional adjustment device.5. Compression and extension speed adjustable.6. Reaction force will be adjustable at any time of usage.(in case of charge up) Various endfittings Specification Material Specification Tube(Cylinder) : STKM12 Piston Rod : S-454C, 25C(with nitride treatment) Gas : Nitrogen 99.99% purity Standards Test Tensile strength test : Min. 5,000N Life cycle test(Min. 40,000 times) High temperature test at +80°C Low temperature test at -30°C Model No. MODEL. NO. Rod DIA(mm) CYLINDER DIAm(mm) L.MAX(mm) STROKE(mm) FORCE(N) HS0-Seal 6 15 100-500 30-150 10-400 HS1-Seal 8 18 100-700 50-200 50-800 HS2-Seal 10 22 150-900 70-255 50-1200 HS3-Seal 12.5 27.4 200-900 100-300 100-1500 HS4-Seal 12.5 22 200-900 100-300 100-1500