Specification
Item / Model
IFC-3137
IFC-3645
IFC-36110
IFC-4675
IFC-5175
IFC-5675
Temperature range (°C)
550°C
Load capacity (l)
11
16
38
45
58
85
Power consumption (kw)
8
10
15
14
18
22
Air consumption (l/min)
60~130
60~150
160~300
150~300
150~450
220~500
Air pressure (Kg/cm2)
2~10
Outer dimensions (mm)
625 x 650 x 900
690 x 890 x 900
690 x 890 x 1650
790 x 1050 x 1350
860 x 1250 x 1400
Power supply option
220V / 380V 440V. 3ph. 50~60Hz
IFC weight (Kg)
98
180
240
450
880
Basic items: Cleaning equipment, basket, Medium, Cyclone/ Recovery Bin, Adapter Damper
Optional items: To be purchased separately
There are various models for customer uses and made to order is also available
Cleaning furnace: Cleaning area to clean residue of precise parts
Cyclone: Centrifugal precipitator to collect particles like carbon scattering in the air from first precipitator.
Scrubber: Gas cleaner which neutralizes the toxic gas by liquefaction.
After Burner: Re-combustion unit to release residual toxic gas as clean gas by combustion with oxygen and LPG.
Problems of existing cleaning method
Cleaning method
Problems
Chemical processing
It is possible to clean only soluble plastics. It requires a lot of time to clean. Solvent, TCE, CFC
High-temperature incinerator
It takes longer time due to low heat conductivity. Cleaned mechanical parts may be twisted. It cannot be used for precise mold.
Tool or wire brush
It is the most underdeveloped cleaning method. It needs long working time and mold wear or damage is considerable.
High temperature salt bath type
It needs a lot of maintenance cost by high price salt medium and continuous power supply to prevent coagulation and there is a risk of burns caused by explosion. It also may cause corrosion or thermal deformation.
Vacuum type
Facility cost is big and there is a risk of explosion.
Ultrasonic type
It is the most popular method. It is impossible to remove residual polymer.
Dry ice type
Surface attachment concerned. It is impossible to use precise mold.
I.F.C. Cleaning coverage
Field
Parts
Fiber
Distributor plates, Filter elements, Mixers, Spinning Gear pumps, Spin packs, Spinnerets. etc.,
Polymer extrusion
Housing, Extrsion heads, Die plates, Melt pumps, Breaker plates, etc.,
Film
Die plates, Distributors, Filters, Mixers, Screws, Screw elements, etc.,
Injection molding
Dies, Hot runners, Needle valve nozzles, etc.,
Incineration temperature
Poltmer to be removed
350°C
Rubber deboning Polycarbonate
440°C~450°C
Polyurethane
425°C~500°C
Polypropylene
450°C~480°C
Ethylene methacytic
450°C
Nylon, Polystyene, Styrene, Fluoropolymers
450°C~500°C
Polyethylene, PVC, Organic matter/oil/grease
450°C~500°C
Paint, Teflon, Engineering plastics.
550°C
Silicone / rubber
I.F.C. with excellent cleaning effect and economics
Currently, plastic products are widely used in daily life and overall industry. According to this, manufacturers need more complicated and precise parts than before. They are struggling in cleaning precise parts such as Dies, Molds and Spinnerets used essentially in plastic manufacturing process. Also existing cleaning method needs a lot of manpower and time, wear of corrosion of the parts and it causes environmental contamination. To solve these problems, we have developed an industrial mold cleaner using Fluidized Bed Principle. For last 30 years, many larger domestic companies and overseas companies have been using our I.F.C.
I.F.C. Principle and Operation
I.F.C. is a cleaning equipment using Fluidized Bed Principle to clean out the residue in precise parts such as Dies, Nozzles, Screws, Breaker plate or Molds which are difficult to be cleaned by hands more efficiently.Before operating I.F.C. cleaning equipment, Thermal Medium is filled in cleaning furnace. Fluid is heated up to the temperature (400~ 500 ?) which is the most proper to clean as compressed air is injected into cleaning furnace from air supplier. At this time, a Fluidized Bed like boiling liquid is formed as powder articles (fluid) float. If putting things to be cleaned in a basket into this Fluidized Bed, cleaning is completed around in 30~50 minutes and toxic gases generated during cleaning work are released as clean gases passing through re-combustion process.
Thermal Medium: It is most suitable as flow medium in the aspects of thermal conductivity, temperature stability, uniformity and environmental protection. It is very sage as it is inactive.
Cleanser (I.F.C)
Description
Product Inquiry
Purchase Product Catalog
Payment & Shipping Conditions:
- Payment: We accept payment through Paypal Only.
- Shipping: We will ship the catalog once the payment is received. And you will be receiving the catalog with in 10 -14 busines days. Shipping might be delayed in due to international shipping conditions which is depends on the countries receiveing. In case hard copy of catalog is not available then we will ship the soft copy.
- Refund: We can refund the order before shipping process was initiated. Incase Catalog not available, we will make sure to refund the order.
- Note: This is a Catalog Produt.
Share Cleanser (I.F.C) in Social Media