Absorb Moisture Agent

Features Moisture contained in various chemicals which are used in the mixing process of rubber products and air penetrated in the mixing process usually lead to the deterioration of production efficiencies, the increase of defect rate, the inconsistency of product quality, etc. ANFOGEN(Absorbs Moisture Agent) has been developed for the purpose of production of quality products and it can completely remove the moisture and the air by acting as an anti foaming agent or a moisture removing agent. Therefore, it is sure that ANFOGEN will contribute to the cost-saving of production and the improvement of product quality to a great extent. ANFOGEN absorbs moisture and air more than 30% of self-weight of the products by means of transformation of calcium oxide into calcium hydroxide as shown in the following formular contributing to the production of density-consistent products without containing moisture, airs and vapours. CaO 1  + H 2 O 2  ----- Ca(OH)2 3 + 15.1 kcal/molMw. : 1 56.08  2  18.02  3  74.10Mw. denotes molecular weight. ANFOGEN(Absorbs Moisture Agent) as well as zinc oxide and magnesium oxide which are used as rubber mixing compounds is used in the mixing process of rubber products and plastic products as vulcanization expediting agent. Magnesium oxide is conventionally used for synthetic rubber like neoprene rubber (CR). However, when this chemical is replaced with ANFOGEN, the considerable  amount of production cost-savings can be obtained and clear surface seating works can be available without changing the physical characteristics of the products. ANFOGEN(Absorbs Moisture Agent) prevents a lot of undesired side-effects caused by hydrochlorine (HCl) by acting a remover of chlorine which is generated in the course of processing of CR,PVC mixing compound. Physical Properties Analysis item ANFOGEN #200/400 ANFOGEN#600 ANFOGEN#600H Remark Physical appearance Grey granule Pale grey powder   Calcium oxide(%) 75% Min. 93% Min. 95% Min. EDTAxNN-indicator Heat loss(%) 25% Max. 6% Max. 5% Max. 750 ± 50°C x 30min Moisture absorption rate(%) 20% Min. 25% Min. 28% Min. Dry Wt. 110°C, after reaction 1:1-H2O Sieve residue(%) 0.5% Max. 0.5% Max. 3.5um mean, 20um (max.) 400 mesh Other Product ANTIFOAMING AGENTANFOGEN #200/400 ANTIFOAMING AGENTANFOGEN #600/600H Features& Advantages 1) Calcium oxide coated with various refined deoxidized special oils and surface-active agents2) Prevents the penetrations of air in case of compound mixing works and sheeting works with open-mill.3) Improves the efficiencies of calender work and extrusion work without deteriorating the effects of insulation.4) Improves the adhesive efficiencies of conveyor and v-belts remarkably.5) Prevents the formations of porous surface on the product. 6) Prevents the formation of foam usually occured in the course of CR,PVC blending, particularly dry blending.7) Does not change the physical properties of principal material. 1) Calcium oxide coated with a small quantity of surface active agent.2) Removes moistures to a great extent.3) Possesses excellent dispersion effects as it is coated with surface-active agent.4) Does not change the physial properties of principal material.5) #600H is minutely particle of CaO dust for Breathable film/Biodegradable film Application Weatherstrips for automotive.Gaskets for building and ship.Rollers of paper printing m/c, roll of dyeing m/c.Calender films. Rubber sheets.Electric wire products(rubber coating) Same as ANFOGEN #200/400 UsageQuantity 3-5% for sponge rubber product2-3% for CR,PVC products5-10% for solid rubber product 3-10% for rubber products2-3% for PVC/PE products Usage Time Add during mixing process. Add during mixing process or blending process. Packaging 20kg Carton 20kg Carton or Craft papers