Pilot Fermenter

Bioforce Pilot 500L Qty 1UNIT Vessel Total 500, Working 350L | Vessel- Design pressure: Max. 3.0 bar(g), Working pressure: 2.5 bar(g) | Material: STS 316L | Design temp.: 150C | Surface finish inside / #400 | § Sanitary diaphragm pressure gauge  | Design temp.: 150C | Material: STS 304  1UNIT Base Frame & Pipes, Fittings & Valves Compact sanitary design, Diaphragm valves, ball valves, solenoid valves, Stainless steel pipes | Pressure range: Low pressure line- 2kgf/cm2, High pressure line-3.5~4kgf/cm2 | Connection: ISO 4200, ASTM 269, | Surface: Mechanically polished and electropolished | Valves: Pressure relief valve, automatic or manual diaphragm valves | Frame: open frame type 1UNIT Agitation System  AC motor, RPM: 0 ~ 50 (in water), Top mechanical seal  |  Disc turbine type impellers (STS 316L) : 6 blades, 3 stages | Three baffle plates (STS 316L) 1UNIT Aeration System Sterilizable final filter element (PTFE) : 0.2 micron STS 316L | Ring type sparger, Accomodat flow rate quantity: 1VVM or 2VVM (Option) | Inlet air filter- filter element: PTFE, 0.2 micron, Filter area: 0.2m2, Sterilization: 120C, 30min, Inlet airfilter housing: design-sanitary, material- 316L | Air flow control meter: Type- mass flow meter, Control- Manual valve, Range(option):  1UNIT TEMP. Control System Measuring range: 0 ~ 150C, Sensor: Pt-100 ohm RTD sensor with connecting cable, steam sterilizable, measuring principle: linear resistance type, Control range: 10 ~ 65C | Vessel jacket with close loops for temp control: Secondary loop- valves for steam and cool water, On/Off diaphragm valves for water and steam supply, Circulation pump for hot and cool water supply, Heat exchanger for hot water supply 1UNIT Automatic Vessel Pressure Control System  Measuring range : 0.00 ~ 2.00 Kg/cm2 | Pressure transmitter (Yokogawa or Yamatake) | Control valve with electro-pneumatic positioner | Material SCS 13/STS 316L | Glove  type 1UNIT Automatic Sterilization System Operation mode: Stop/Sterilization/Cooling/Culture. Sterilization time set on the control panel & digital display | Sterilization temp. range: 121 ~ 130C | Set cooling temp.| User setting and programmable | Security: password protected | On/Off diaphragm valves 1UNIT Harvest Unit Manually separate and plural sterilization durng fermentation, Non-contamination structure 1UNIT Sampling Unit Manually separate and plural sterilization during fermentation, Diaphragm valves, Non-contamination structure 1UNIT pH Control System Measuring range: pH 0 ~ 14.00, Accuracy: +/-0.01 | pH electrode: Type- Gel type electrode, Insertion length: 120mm, Electrode holder: 25Ø mm, STS 316L  | 2 Reagent Chambers, On-off diaphragm valves  and air solenoid valves  1UNIT DO Control System Measuring range: 0.00 ~ 20.00 ppm or 0.0 ~ 100.0%, Resolution: 0.1ppm or 1%, Accuracy: FS +/-0.5% | DO electrode: Type- Inpro (Mettler-Toledo), Insertion length: 120mm, Electrode hoder: 25Ø mm, 316L  1UNIT Antiform Control System Conductivity type, Material; tefron | Platinum foam detecting sensorcable length: 1.5M |  Chemical reagent Bottle volume : 250mL 1UNIT Chamber for Anti-foam agents 2 Glass Bottle of 250ml for Chemical Acid & Base), | SS316L Single wall 5 L |  Peristaltic Pump 1UNIT Air Exhaust Unit Exhaust air/gas exists through condensor to minimize liquied evaporation | Condensor: Design- Sanitary and efficient cooling, Sterilization: automatically during vessel sterilization, Connection: Tri-clamping for easy assembly and disassembly for cleaning 1UNIT Exhaust Air filter Unit Outlet air filter- filter element: PTFE, 0.2 micron, Filter area: 0.2m2, Sterilization: 120C, 30min, Outlet airfilter housing: design-sanitary, material- 316L 1UNIT