HDPf

Descriptions Application : Injection Molding Characteristics : High Impact Strength, High Flowability Use Case : Silicon Catridge, Picnic Table, Bottle Cap Specification Item (term) Value Unit Method Melt Index 6 g/10min. ASTM D1238 Density 0.958 g/cm3 ASTM D1505 Physical Properties Item (term) Value Unit Method Mold Shrinkage (Linear) 1.5 - 2.5 g/10min. KPIC Method Water Absorption <0.01 g/cm3 ASTM D570 Tensile Strength (Yield) 260 kgf/cm2 ASTM D638 Elongation (Break) >500 % ASTM D638 Flexural Modulus 13,000 kgf/cm2 ASTM D790 Hardness (Rockwell) 55 R Scale ASTM D785 Impact Strength (Izod with notch) 7 kgf cm/cm ASTM D256 Melting Point 135 oC ASTM D3418 Softening Point (Vicat) 124 oC ASTM D1525 Heat Deflection Temperature 74 oC ASTM D648 Brittleness Temperature <-70 10-4cal cm/cm sec. oC KPIC Method Thermal Expansion (Linear) 1.5 10-4cm/cm oC ASTM D696 Specific Heat 0.45 cal/goC KPIC Method Volume Resistivity 1 1017ohm.cm ASTM D257 Dielectric Constant (1KHz) 2.3 . ASTM D150 Dissipation Factor (1KHz) 2 10-4 ASTM D150 Dielectric Strength (Short Time) 48 KV/mm ASTM D149 * Above data are intended to serve as guides only, and are not sales specification limits FDA YUHWA POLYPRO® 4017 complies with FDA regulations. Technical Servies