Introduction
SC770R is the product to be used for the purpose of reinforcing the durability of bridges and overpasses which is suitable for repair and reinforcement urgently required. It is suitable for repair and reinforcement mortar on the cement floor with exposed rebar caused by impact damage due to the large boulder inflowing during the rainy season, bridge deck or bridge joint set mortar (mortar Futa) which can be corroded in winter chloride, and when an emergency repair is needed due to the rebar exposed, cement mortar reinforcement is placed in approximately 300mm thickness, so the water rather overflows due to less conveyance and the road is frequently washed away. For this product, if only about 30mm in thickness is placed using liquidity-reinforced mortar formulations, the durability is enhanced and the service life is extended. * Mixing ratio (main component: curing agent) = 4:1
Features of Product
As the construction period is shortened and liquidity is good, injecting into a narrow space is available. - Injecting into even 50mm thickness of a narrow space is available, so when placing concrete in 50mm thickness, it has good workability of latticing 12 mm and 10 mm of rebars.
Excellent adhesion
As weak alkaline, it does not affect neutralization to the concrete.
Excellent mechanical strength and excellent durability
Due to almost no shrinkage in curing shrinkage, there is no crack if working at the same time.
No separation of aggregate. - As silica and filler are mixed with resin, no crack occurs for curing.
Excellent ozone-resistance, water resistance, salt water resistance, chemical resistance, weather proof, etc.
Excellent water-resistance, waterproof.
Where to Use
Emergency repair and reinforcement of bridges and overpass tops
Fixation of mortar (Futa mortar) on bridges, overpasses joints
Emergency repair and reinforcement of airfield runway, hangars.
Filling, repair and reinforcement on the damaged parts of highways.
Heavy weight vehicle floor or parking floor.
Factories, warehouses, decks high strength mortar.
Filling adhesion of concrete PC tops niche.
Shoe anchor fixed mortar of bridges, overpasses or piers
How to Store
Keep the lid closed completely at dry and room temperature at 20°C to be stored away from any source of moisture.
Please dispose the product out of retention period chemically.
Retention period: 4 months for summer, 6 months for winter
Properties
Test item
Test result
Test item
Test result
Test item
Test result
Mixing ratio (main component: curing agent)
3 :1
Adhesion (kg/cm2,concrete)
40
Compressive strength (kg/cm3, mixture=aggregate : resin=3:1)
750
Viscosity(CPS/25°C)
1100
Adhesion(kg/cm2, steel+steel)
110
Tensile strength(kg/cm3, mixture= aggregate : resin=3:1)
250
Pot life(min/23°C,Resin)
10
Curing condition(hour/25~30°C)
2~3
Flexural Strength (kg/cm3, mixture(mixture= aggregate : resin=3:1)
350
Pot life (min/15°C,Resin)
20
Curing condition(hour/15°C)
10~12
Properties
Reforming epoxy resin
Al Marcon Resin (Emergency Maintenance)
Description
Product Inquiry
Purchase Product Catalog
Payment & Shipping Conditions:
- Payment: We accept payment through Paypal Only.
- Shipping: We will ship the catalog once the payment is received. And you will be receiving the catalog with in 10 -14 busines days. Shipping might be delayed in due to international shipping conditions which is depends on the countries receiveing. In case hard copy of catalog is not available then we will ship the soft copy.
- Refund: We can refund the order before shipping process was initiated. Incase Catalog not available, we will make sure to refund the order.
- Note: This is a Catalog Produt.
Share Al Marcon Resin (Emergency Maintenance) in Social Media