Eco-friendly Pure Epoxy Coatings - Oil Res...

Environmental Certification: No. 8299 Most of the commercially available products used to have cracks and defects in two or three years before and after, which causes wastes of the cost due to repair. SC615 is an eco-friendly coating product which is long-lasting 2 to 5 times more than other products even if it is the thinly painted. * Mixing ratio (main component: curing agent) = 5:1 Features of Product Eco-friendly certified product As the product is manufactured using carefully selected materials suitable for eco-friendly, there is a function to inhibit the release of voc or toxic substances, and adsorb and decompose heavy metals, not to cause various skin diseases. In addition, it is eco-friendly coatings with the function to inhibit the proliferation of mold bacterium. 2 to 3 times longer service life For the modified epoxy coatings, even if it's constructed by more than 3mm thick and it's used for 2 to 3 years, there are wear and cracks in the rotation, but this film is made of pure epoxy resin without including impurities to provide more excellent adhesion, workability and wear resistance than the existing modified epoxy, so it has 5 to 7 years of the service life even if constructed in 0.7mm~1.0mm thickness.. Excellent adhesion, waterproof, chemical resistance, oil resistant coatings - There is no neutralization reaction against concrete, so it has the excellent adhesion. - Due to hydrophobic substrate, it has good water resistance and waterproof, so it is suitable for the water treatment plant, water reservoir, swimming pool, pool waterproof. - It is not soluble to oil such as lubricants, engine oil. - It is excellent for oil resistant coatings and safe from various chemicals. It is made of soft ingredients, so if it is applied to the wide bottom, no crack will appear. No contraction, so construction in 5~10mm thickness at one time will be possible.. Where to Use Factory floor (food, electricity, electronics, beverages, paper, milk processing, oil and fat, cosmetics, confectionery, meat processing, automotive assembly and parts, medical equipment, machinery, shipbuilding, hangar, maintenance, pharmaceuticals), floors of building and apartment parking lot. Hospital, books, printing, agricultural and aquatic product center, indoor swimming pool, pool, water treatment plant, water reservoir, warehouses, large discount shop, grocery corner, pulp mill floor. How to Store Keep the lid closed completely at dry and room temperature at 20°C to be stored away from any source of moisture. Please dispose the product out of retention period chemically. Retention period: 4 months for summer, 6 months for winter Properties Test item Test result Test item Test result Test item Test result Mixing ratio (main component: curing agent) 4:1 Viscosity (CPS/25°C) 2,500 Chemical resistance (Dip in 5% sulfuric acid for 500 hours) No change Pot life (min/25°C) 30 Set to touch(Hour / 25°C) 12 Salt water resistance (Dip in sea water for 500 hours) No change Curing time (hour/25°C) 24 Tensile shear strength (kg/cm2) 115 Absorptance (%,dip in water for 72 hours) 0.05 Heat resistance 110 Water resistance (80°C / 72hrs) No change Chemical resistance (Dip in Engine oil for one hour) No change Low-temperature resistance -25 Specific gravity 1.4 Properties Pure epoxy