Rheothix KJ-9200SA

Description KJ-9200SA is a specially designed sag control agent based on moidified thermosetting acrylic resin including fine crystalline needles of urea structure. When used in industrial coatings including metallic pigments, KG-9200SA can impart excellent orientation of metallic pigments, adhesion and flexibility. KJ-9200SA has a good compatibility with almost all base resins commonly used for coatings, particularly with CAB(Cellulose Acetate Butyrate) resin. Advantages Excellent orientation of Metallic pigments Good anti-sagging whilst the leveling remains very good Impart completely clear coat after baking Prevent settling, flocculation and flooding of pigmented coating system No influence on durability, chemical & mecanical resistance Excellent heat stability Prevents pigment settling and hard-caking without significant viscosity increase Physical Properties Apperance : Milky White Liquid Non-Volatiles : 58 ~ 62 wt%(150°C x 30min) Specific Gravity(25°C) : 0.98 ~ 1.02 Moisture Content : Max. 2,000 ppm(Karl-Fisher) Hydroxyl Value(Solution) : Around 50 mg KOH/g Viscosity(25°C) : Brookfield, RVT / 60 RPM - 10~40 Poise / 6 RPM - 50 ~ 250 Poise Solvent : Kocosol 100 / Butyl Acetate / PM Solvent = 70/21/9 Incorporation It is not advicable to add KJ-9200SA at grinding stage of coatings formulation as this will reduce the efficiency of the sag control agent. For maximum efficiency, add KJ-9200SA at the let down stage. Storage KJ-9200SA should be stored in the tightly closed original container at temperature below 30°C. Avoid exposure to heat source and direct sunlight. Under recommended storage condition, KJ-9200SA may be stored up to 12 months. Packaging 180 Kgs in 220L steel drum, possible to pack in open drum on customer's requirement.