Epoxy Primer

SHAIC EPOXY PRIMER is designed for 3 layer coating system for superior corrosion protection of field joints of steel pipelines. Epoxy primer corrosion protection resists impact, abrasion as well as cathodic disbondment, dielectric breakdown. Application Procedure 1. Prepare the pipe surface as recommended in the product application2. Pour cure into base as 3 parts base to 1 part of cure.Stir the mixture for a minimum of 30 seconds to ensure homogeneous mixture.3. Apply mixed epoxy primer as indicated in the product application.4. Epoxy Primer covers 20 sq.m/gallon(215sq.ft/gallon) or 5.3 sq.m/liter(57 sq.ft/liter). This coverage is based on 4 to 6 mils of thickness & assuming 20% waste. Data Specific gravity-Base : 1.65(ASTM D 1475)-Cure : 1.00(ASTM D 1475) Pot life : 25minutes in condition of 23°C(73°F) Shelf life : 2 years in condition of out of sunlight (between 10°C(with 20°C)) Flash point-Base : 98°C(234°F)-Cure : 95°C(228°F) Mixing curing temperature : 10°C(50°F) Epoxy Conversion Table Assuming 300mm/12" cutback Pipe O.D Required quantity Joint/US gallon mm inch Base(ml) Cure(ml) 115 4 1/2 15 5 186 170 6.6 22.5 7.5 126 230 8.6 30 10 93 280 10 3/4 37.5 12.5 76 315 12 3/4 39 13 68 355 14 48.9 16.3 60 400 16 52.5 17.5 53 450 18 60 20 47 500 20 67.5 22.5 43 610 24 82.5 27.5 35 760 30 87.9 29.3 28 915 36 123.9 41.3 23 1060 42 142.5 47.5 20 1220 48 161.4 53.8 17 1420 56 187.5 62.5 15 1520 60 202.5 67.5 14 Note : before using, please consult SHAIC material safety data sheets and follow your local or national safety regulations. Assuming 450mm/18" cutback Pipe O.D Required quantity Joint/US gallon mm inch Base(ml) Cure(ml) 115 4 1/2 23.7 7.9 120 170 6.6 29.4 9.8 76 230 8.6 45.6 15.2 62 280 10 3/4 58.8 19.6 48 315 12 3/4 69.3 23.1 41 355 14 75.6 25.2 37 400 16 81.6 27.2 34 450 18 96.6 32.2 29 500 20 106.8 35.6 26 610 24 129.6 43.2 21 760 30 156.3 52.1 18 915 36 187.8 62.6 15 1060 42 226.8 75.6 112 1220 48 247.2 82.4 11 1420 56 296.1 98.7 9 1520 60 304.5 101.5 9 Note : before using, please consult SHAIC material safety data sheets and follow your local or national safety regulations. Assuming 600mm/24" cutback Pipe O.D Required quantity Joint/US gallon mm inch Base(ml) Cure(ml) 115 4 1/2 30.6 10.2 93 170 6.6 45.3 15.1 63 230 8.6 61.2 20.4 46 280 10 3/4 74.7 24.9 38 315 12 3/4 84 28 34 355 14 94.5 31.5 30 400 16 106.5 35.5 27 450 18 119.7 39.9 24 500 20 133.2 44.4 21 610 24 162.3 54.1 17 760 30 202.2 67.4 14 915 36 243.3 81.1 12 1060 42 261.9 87.3 10 1220 48 324.6 108.2 9 1420 56 377.7 125.9 8 1520 60 405.9 135.3 7 Note : before using, please consult SHAIC material safety data sheets and follow your local or national safety regulations.