Acid-resistant Epoxy Solvent-free Lining

Korea Patent No. 0577463 This product is acid-resistant epoxy-based lining paint manufactured to fit 30% sulfuric acid, 30% hydrochloric acid, 40% caustic soda, and solvents are not added, so it is the product to prevent safety accidents for the hallucination by solvents when working in the closed places or the basement. It can be used to conduct acid-resistant construction fast in places (steel mills) required for acid-resistance in the bottom of acid and alkali tanks, plating factory, fertilizer, chemicals, pharmaceuticals, pulp, wastewater treatment plants, oil refineries, the floor of galvanized steel and stainless steel manufacturing plant. . * Mixing ratio (main component: curing agent) = 4:1 Features of Product Excellent bonding strength and adhesion, so there is no delamination. As the product is mildly alkaline, it doesn't oxidize or age the concrete surface and the steel surface. As the product is manufactured with pure epoxy, weather resistance is excellent and service life is long. Abrasion-resistance is excellent, so less scratches on the surface. High strength of a product with strong durability and impact resistance, Acid resistance and alkali resistance are excellent.. Where to Use Manufacturing plants for organic solvents, chemical manufacturing plants, oil refineries, chemical resistance flooring materials Galvanized steel and stainless steel smelting plant floor, acid resistant flooring materials Plating factory, Hwaseong film plant, wastewater treatment plants, thermal power plants, wastewater treatment plants, petrochemical manufacturing plant flooring materials, metal factories, fertilizers, explosives, pharmaceuticals, food formulation chamber How to Store Manufacturing plants for organic solvents, chemical manufacturing plants, oil refineries, chemical resistance flooring materials Please dispose the product out of retention period chemically. Retention period: 4 months for summer, 6 months for winter Properties Test item Test result Test item Test result Test item Test result Mixing ratio (main component: curing agent) 4 : 1 Water resistance(80°C/72hrs ) No change Specific gravity 14 Viscosity(CPS/25°C) 2100 Chemical resistance (Dip in 35% sulfuric acid for 500 hours) No change Curing time(hour/25°C) No change Pot life (min/25°C) 30 Chemical resistance(Dip in 30% hydrochloric acid for 500 hours) No change Curing time(hour/10°C) 0.05 Pot Life (min/10°C) 60 Chemical resistance(Dip in 40% caustic soda for 500 hours) No change Insulation resistance(O/mm) 1 x 1013 Set to touch(hour/25°C) 6 Salt water resistance (Dip in sea water for 500 hours) No change Adhesive strength (kg/cm3) 100 Heat resistance(°C) 120 Absorptance (%,dip in water for 72 hours) 0.05 Low-temperatureresistance -25 Solid content(%) 95 - - - -