Dry Concrete Solvent-free Coating

Introduction It is a Solvent-free coating product to prevent safety accidents for the hallucination by solvents occur frequently when working on the epoxy in the closed places of the basement or underground tanks. Solvents are not diluted, so it is frequently used for the adhesion in the basement or structures by preventing safety accidents for the hallucination and increasing adhesion. Saints and adhesive is utilized. * Mixing ratio (main component: curing agent) = 2:1 Features of Product Excellent adhesion to concrete Excellent chloride invasion resistance, chemical resistance, abrasion resistance. Excellent water resistance and excellent durability.. Good permeability to the concrete increases the strength of the surface on the cracked area. As the product is mildly alkaline, it doesn't make the concrete oxidized or aged, so there is no delamination. It is non-toxic after curing, so it guarantees the excellence during the construction on the floor of food warehouse floor. It is the solvent-free coating product, so it doesn't shrink and is not split. Where to Use Basement, underground tanks, underground common ducts, common duct for gas pipeline transport, the electric telephone line common duct, bottom coating solvent-free primer How to Store Keep the lid closed completely at dry and room temperature at 20°C to be stored away from any source of moisture. Please dispose the product out of retention period chemically. Retention period: 4 months for summer, 6 months for winter Properties Test item Test result Test item Test result Test item Test result Mixing ratio (main component: curing agent) 2 : 1 Water resistance(80°C/72hrs ) No change Specific gravity 1.12 Viscosity(CPS/25°C) 400 Chemical resistance (Dip in 5% sulfuric acid for 500 hours) No change Curing time(hour/25°C) 24 Pot life (min/25°C) 24 Chemical resistance(Dip in 5% hydrochloric acid for 500 hours) No change Curing time(hour/10°C) 48 Pot Life (min/10°C) 110 Chemical resistance(Dip in 5% caustic soda for 500 hours) No change Insulation resistance(O/mm) 1 x 1015 Low-temperatureresistance -25 Salt water resistance (Dip in sea water for 500 hours) No change Adhesive strength (kg/cm3) 125 Heat resistance(°C) 100 Absorptance (%,dip in water for 72 hours) 0.05