Acid-resistant Epoxy Mortar

Korea Patent No. 0577463 It is the Resin mortar to be used when high-capacity drug storage tanks and wastewater treatment plant are constructed, and the glass fiber- or glass mat-reinforced lining technique is applied to the inside. If you use a resin mortar method by mixing it with silica, it will be acid-resistant alkali flooring materials given by very good waterproof. In addition, if you coat with the paint produced by this Resin mortar to protect the wall or steel structures where chemicals or gases are volatilized, the chemicals can be protected. * Mixing ratio (main component: curing agent) = 2:1 Features of Product As an acid-resistant epoxy type, it has excellent chemical resistance, and excellent durability. Acid-resistant mortar of plating film treatment plant After curing, it is non-toxic, so it guaranties the excellence when you are working on the floor of the food warehouse. As it is a solvent-free product, it doesn't shrink and is not split. Tensile strength is high, and water resistance, weather resistance, chemical resistance and durability are excellent. Where to Use Acid resistant mortar of steel mills, metal, oil refineries, power plants, battery factories, Acid-resistant mortar of plating film treatment plant Alkali resistant resin mortar and lining in textile dyeing, deodorizing warehouse, pulp mixing chamber, detergent manufacturing chamber, soaps manufacturing chamber The resin mortar on the floor of cement cellar, chemicals pantry, chemical plants, fertilizer storage warehouse How to Store Keep the lid closed completely at dry and room temperature at 20°C to be stored away from any source of moisture. Please dispose the product out of retention period chemically. Retention period: 4 months for summer, 6 months for winter Properties Test item Test result Test item Test result Test item Test result Mixing ratio (main component: curing agent) 2 : 1 Water resistance(80°C/72hrs ) No change Chemical resistance(Dip in 5% sulfuric acid for 500 hours) 1.21 Viscosity(CPS/25°C) 1700 Chemical resistance (Dip in 35% sulfuric acid for 500 hours) No change Salt water resistance (Dip in sea water for 500 hours) 24 Pot life (min/25°C) 30 Chemical resistance (Dip in 35% hydrochloric acid for 500 hours) No change Absorptance (%,dip in water for 72 hours) 48 Pot Life (min/10°C) 50 Chemical resistance(Dip in 45% caustic soda for 500 hours) No change Chemical resistance(Dip in Engine oil for one hour) 1 x 1016 Heat resistance(°C) 100 Salt water resistance (Dip in sea water for 500 hours) No change Adhesive strength (kg/cm3) 110 Low-temperature resistance -25 Absorptance (%,dip in water for 72 hours) 0.016 - -