Sannaeeum Green Super Silica

SANNAEEUMGreen SUPER SILICA Sannaeeum Green Super Silica is an aqueous one-liquid type having colloidal silica as a binder, and is a coating material of super-corpuscular and inorganic polymer series for building. It has a setting property at normal temperature as well as a fast setting, forming silica fi lm promptly. This product has excellent functions such as weather durability, contamination resistance, water repellency, non-fl ammability, air venting, and adhesiveness peculiar to silica, compared to conventional emulsion paints made of synthetic resins. Features Since it is stable against ultraviolet rays and heat, its durability is excellent for long-time use. Since its soak ability and adhesiveness is excellent compared to conventional emulsion paints, it can be applied directly without a sealer. Since it has electric-charging prevention ability, it prevents surface contamination, making it always clean. It is a product free of environmental pollution, without any organic solvent that causes air pollution or harmfulness to the human body. Since it is inorganic polymer paint, its coating film is nonflammable. Since it is an aqueous one-liquid type, it can be used directly on the site. Application Indoors and outdoors Surfaces of concrete, Mortar, PC, ALC, Lightweight concrete, concrete block, and other repair works Condition of the ground surface For the ground materials such as mortar and concrete, use it after sufficient curing and drying at moisture levels below 10% and pH levels below 10. For materials having a high absorption rate like ALC, apply surface treatment materials or absorption preventive materials first. Completely remove white powder, unhardened cement, oil, foreign materials, and form removal agent for better coating. For damaged and cracked ground surfaces, treat with Green Super that is a ground-surface treatment material. Working Method Process Material Compounding ratio Coating quantity Number of coats Drying time Coating tool   SML 100 0.3-0.4kg/m2 1-2coats More than 24 hours 20°C Brush, Roller, Spray Water 0~5 *Note : Do note coat too thickly upon first application