Pace 1000

 UV resistance water repellent and multi purpose elastomeric coatings 01 Product Description    Pace-1000 is a safe user-friendly, odorless, non flammable aqueous acrylic polymer dispersion. It is a water repellent and multi-purpose elastomeric laminate coatings marked by high adhesion and flexibility when coated on the rough surface such as concrete flat-roof and wall as well as masonry and wood and etc. Pace 1000 is non yellowing, UV resistance, exhibiting good weathering resistance, impact damage resistance, stress cracking resistance, excellent resistance to damage from oil, acid, salts, alkali.    02 Application    (1) Water proofing and protective coatings for concrete flat-roof and wall. (2) Water proofing and protective coatings for brick, masonry, wood.    03 Benefits/Characteristics     (1) Not water-soluble(2) Non yellowing(3) Suitable for coloring(4) UV resistance (5) Exhibiting good weathering resistance(6) High elasticity, therefore of the high stress cracking resistance(7) Impact damage resistance.-Excellent resistance to damage from oil, acid, salts, alkali.     04 Test Results    Test Methods : ASTM C 1439, ASTM D 3637, ASTM D 3980, ASTM D 4364  Test Item Test Result Bond Strength ( N / cm2 ) 214 Tensile Strength ( N / cm2 ) 115 Elongation (%) 1,105 Tear Resistance (N/cm) 65 Absorption Ratio(%) 1hours 5hours 24hours 0.20 0.22 0.25 Permeability Ratio (%) 0 Water Vapor Permeability Suitability Low Temperature Flexibility No Effect Acid Water Resistance(2% HCl ×20? ×72hrs) No Effect Alkali Water Resistance(2% NaOH ×20? ×72hrs) No Effect Salt Water Resistance(3% NaCl-30days) No Effect Accelerated Weathering Resistance(Sunshine Carbon ×120hrs) No Effect     05 Directions    (1) Apply by brush, roller, and sprayer. (2) Thickly application, pour its into the surface scrub with rag.(3) Apply after cleaning with water of the surface. Estimated coverage per thicknessDivide thickness in inches into 1.6 for square feet of coverage, per gallon.Some examples1/2 inch thick………….. 3.2 SF per gallon1/4 inch thick………….. 6.4 SF per gallon1/16 inch thick…………25.6 SF per gallon1/32 inch thick…………51.2 SF per gallon1/64 inch thick………..102.8 SF per gallon    06 Caution    (1) For a few hours right after coating, avoid wind to prevent fast evaporation. (2) Do not apply if the surface temperature is below 5°C and above 35 °C or above 85% humidity.(3) Applications should be allowed at least 24 hours, to strengthen, depending onapplication thickness, before allowing traffic on surface. This explanatory is intended solely as an application directive. It does not claim to be binding and valid for all modes of application. We recommend the carrying out of a preliminary test application relevant to full-scale application every time.    07 Storage    (1) Containers should be always tightly covered.(2) It should be kept in a over 1°C, maybe do not use if frozen.