PV Backsheet (PA-310E)

PV Backsheet PA-310E Back Film of SFC is manufactured to give a variety of designs from Thermoplastic and Fluor polymer, as a backing sheet for photovoltaic Solar Module due to its excellent strength, weather resistance, UV resistance and moisture barrier properties. PA-310E, is a new multi-layered back film based on two layers of excellent durability fluoropolymer PVF film one layer of oxidized aluminum and one layer of high voltage insulation polyester film. The cell side is treated with a special primer which provides good adhesion to EVA. The structure of "PA-310E" has been designed to provide the best performance of properties in terms of superior moisture barrier, electrical insulation and weather ability, PA-310E us strongly recommended for use Thin Film (GIGS, Amorphous, CdTe etc.,) Module. PA-310E Composition Total Thickness µm 310 Fluoropolymer µm 38 Adhesive µm 10 Oxidized AL µm 9 Adhesive µm 10 PTI µm 250 Special primer µm 3 Total Weight g/m2 430 Product Information (Properties) Tensile Strength MDTD N/10mmN/10mm >300>400 KS A 1512:2001 Elongation MDTD %% >80>70 KS A 1512:2001 Tear Strength MDTD N/mmN/mm >300>400 DIN 53363:2003 Dimensional Stability MD 30min @ 150°CTD 30min @ 150°C %% <1.0<1.0 KS A 1510:2005 Peel Strength of EVA 0.2 m/min T-peeling N/cm >40 KS A 1107:2004 Water Vapor Permeability 38°C / 100% RH38°C / 90% RH g/m2 . 24hrg/m2 . 24hr <0.35<0.30 KS M 3088:2004 Breakdown Voltage 10mA kV >17 KS C 2105:2003 Maximum Permissible System Voltage   VDC >1,000 IEC 60664-1 Remark Width : 800mm ~ 1620mm Color : white (Other colors on request) Cut sheets according to customer's request Advantage of SFC PV Back Film Dimensional stability of backsheet makes vacuum lamination easier Less shrinkage both in machine and transverse direction of backsheet avoids wrinkles during processing Depending on type of EVA the initial adhesion values can vary greatly idth="70">> 1,000 IEC 60664-1 Remark* Width : 800? ~1620?* Color : white (Other colors on request)* Cut sheets according to customer's requestAdvantage of SFC PV Back Film* Dimensional stability of backsheet makes vacuum lamination easier* Less shrinkage both in machine and transverse direction of backsheet avoids wrinkles during processing* Depending on type of EVA the initial adhesion values can vary greatly