Spare Part with Model AT Series Electroini...

Spare Part with Model AT Series Electroinic ¦Collecting Cell (precipitant)¦ Patent number 10-0722863 Length and cross sectional area of the collector plate, gaps between collector plates, and insulation materials of insulators and it position are optimally design to facilitate the collection of many different types of pollutants, increasing the collection efficiency of ionized pollutants at the absorption point. Use Pitch Thickness P/N DUST 0.8mm 0.5t 52002-002-1 MIST 0.6mm 0.5t 0.8t 52002-002-2 ¦Ionizer¦Applying for Patent : 20-2011-0020218 Also, our products adopted SPIKED TYPE replacing previous WIRE TYPE, eliminating concerns about possible coil cut. In addition, they are free from fear of corrosion because dust collection efficiency has been increased after a series of tests. So, as long as the products are maintained properly, they can be used semi-permanently. ¦Power Pack P/N : TK5 2002-006¦Applying for Patent : 20-2002-001892 7 Power Pack turns altering current of 220 into direct current high voltage of 12KVDC, which is necessary for ionizer and collecting cell. When materials with low kindling point are absorbed, high voltage current is limited to minimum wmA, maximum 5mA for safety purposes. ¦Demister & Cative Carbon Filter¦ >> DEMISTER : DEMISTER is installed in front of ionizer to serve as pre-filter and absorb comparatively large pollutants. it is also made from SUS fabric considering practicality and durability. >> ACTIVE CARBON FILTER : A/C FILTER is optional. It serves as an after-filter so that it is excellent in removing smells after dust collection process. Considering practicality, it has box type and is made from SUS fabric for improvement of durability.