Yessform
¦Introduction¦
Cool summer. Warm in winter. Quiet indoor environment. Reduction of heating and cooling cost!Interlayer noise solution "yessfoam system""yessform” guarantees Insulation of building genuine quality
Use of Product
Die combined use of insulating finishing material
Size
Small : 660 x1404, Large : 660 x 1654
Material
Foamy polystyrene (Compressed styrofoam)
Invented By
Kang Chang-gyu
Patent Name
Die framework and its use to install mold dies
¦Comparison¦
The existing dies
Heavy steel products of euros. In-cornorUsing out-corner,High cost of labor and transportationExcessive construction periodCausing genuine temporary material’s cut and damagedAfter the progress of work, attach separate insulation
Yessform Dies
With Lightweight-compressed steyrofoam materialBeing able to personnel and equipment fee,Shorten a loss of materials costs Separate insulation attached is not requiredDie combined use of insulating finishing material
¦System¦
Classification
Item
Condensation
Corner foam
After installing the outer corner upright Do the connective installation of yess foam, and Before the installation of yess foam, pre-install corner foam on the based corner, then connect yess foam to combine them.* Material: Compressed foam
Yess foam
The joint where H-BAR is inserted is concave, and Fixing with yess pin after H-BAR’s insertion, This structure with the combination will have its stability and precision bonding.* Material: Compressed foam
H - BAR
Yess foam connected to each other, and assembled, then, yess pin Fixes them. * Material: Plastic
Yess Tie
Its role is to grab the both form. Fixing H-BAR to keep the inner-space between Yess-Forms, and to support their horizontality Hooks can be combined.* Material: flat tie
Corner Bar
After connecting and installing internal right angle of Yess-Form, fix them with Yess-Pin* Material: Plastic
Yess Ring
Insert to Yess-Tie. Installing to be hooked at of Tie, the internal space of the Yess-Form is kept* Material: Plastic
Yess Pin
H. Bar, Corner Bar connect to the Yess-Form each other to fix them,* Material: Plastic
¦Construal Height of Floor¦
Yess Form’s height is completed with its 2 sheets installed
Height of Floor
Classification
Inner Wall
Outer Wall
3,058 mm
2nd level
1,404
1,654
1st level
1,404
1,404
Over all
2,808
3,058
3,308 mm
2nd level
1,404
1,654
1st level
1,654
1,654
Over all
3,058
3,308
¦Specifications & Patents¦
Type
Dimensions
Material
Patent No.
Patent type
YESSForm
Small: 50 x 660 x 1404Large: 50 x 660 x 1654
Compressed Styrofoam
No. 10-12508602012.3.0637463.0
¦ Registered as a patent in Korea¦ Registered as a design patent in China
CornerForm
Small: 660 x 1404Large: 660 x 1654
Compressed Styrofoam
2013-0047485
¦ Applied for the design patent in Korea
H-Bar
For crossing: 50 x 100For left and right connection: 100 x 100
Plastic
2012306554612012.3.0655461.4
¦ Applied for the patent in Korea¦ Registered as a design patent in China
CornerBar
For crossing : 50 x 100For left and right connection: 100 x 100
Plastic
201230655245
¦ Applied for the patent in Korea¦ Registered as a design patent in China
YESS Tie
180 mm (2.3 x 18mm)
Metal
202306554302012.3.0637401.X
¦ Applied for the patent in Korea¦ Registered as a design patent in China
YESS Ring
30 x 20
Plastic
2013-0047493
¦ Applied for the patent in Korea
¦YESS Form construction on the upper slab¦
Issues of the conventional construction method
Fixes plywood (12mm) on wood with nails for concrete casting on floor plate.Puts insulation and dustproof Styrofoam on plywood, cast concrete, and then removes wood and plywood.
Inconsistency with the total array size of the floor plate causes the cut-off of a scrap of plywood - excess loss of material and labor costs
Transportation, installation, and removal of plywood – excessive cost of transportation
Advantages of YESS Form System
In the state of zero energy loss, the system casts concrete. Therefore, it improves around 15% intensity of cast concrete in winter (cold season) compared to the conventional method.
The system does not require plywood, instead, assemblies YESS form on wood along with H-BAR, Corner Bar, Plastic connection pins. After that, it casts concrete. Therefore, it does not require installation and removal of plywood.: Greatly shortening of construction period, and reduction in labor and material costs.
Use of YESS Form and wood (not use plywood)
¦Fair Comparision¦
¦Constructive Competitiveness¦
Features - cost savings Wall insulation and die construction costs (Horizontal. Vertical 2,400 MM)
Excellent performance! Reference to imagine more satisfactory !
Yessform System
Description
Product Inquiry
Purchase Product Catalog
Payment & Shipping Conditions:
- Payment: We accept payment through Paypal Only.
- Shipping: We will ship the catalog once the payment is received. And you will be receiving the catalog with in 10 -14 busines days. Shipping might be delayed in due to international shipping conditions which is depends on the countries receiveing. In case hard copy of catalog is not available then we will ship the soft copy.
- Refund: We can refund the order before shipping process was initiated. Incase Catalog not available, we will make sure to refund the order.
- Note: This is a Catalog Produt.
Share Yessform System in Social Media