Laminated Belt for Apparel Fusing

Laminated Belt for Apparel Fusing Belts Designed for Fusing & Laminating These laminated belts have been designed to offer a superior alternative to single ply PTFE/Kevlar belts at an economical price. Kinds of Basic Style L-6 : Total thickness 0.15mm, (Nominal thickness 0.075mm x 2ply) L-9 : Total thickness 0.23mm, (Nominal thickness 0.075mm x 3ply) L-10 : Total thickness 0.25mm, (Nominal thickness 0.125mm x 2ply) L-15 : Total thickness 0.38mm, (Nominal thickness 0.125mm x 3ply) Applications of Laminated Belts Textiles - fusing and laminating PVC Processing Carpet Production Wood, Fabrics&Plastics Board production Plastic & Rubber Foam Production Plastics &Rubber Molding Conveyer equipment of Electronics, Semiconductor Line Joint Configurations- In particular, the exceptional flex-wear characteristics of the this joint makes certain that the belt will not suffer from early joint failure.This splice is very smooth and only exhibits a slight thickness change at the individual special treatment in each ply. Edge reinforcing styles according to the customer's requirement (Wrap & Strip) One or two sides reinforced with tracking Guide (Kevlar® Profile or Stud) Specification Merit and Demrit of Laminated belt Merit Single Ply belt Laminated belt Difficult pathway control Easy pathway control Weak splice area due to the low conformability Strong splice due to the excellent conformability Marking happened at splicing part Splice thickness is similar to belt thickness Crude finish of thick belt due to the weave pattern Uniform thickness Weak tensile strength Strong tensile strength Low tear strength Strong tear strength Easily damaged if run off Resists edge wear Belt may be distorted by a strong tension Strong tension resistance without distortion Only one surface available per product Multi-surfaces available ex)AS/non AS, food /drive Short Lifetime (Especially joint area) Long Lifetime (Especially joint area) Top surface soft and easily abraded Plies are subjected to high pressure during manufacture giving a firmer more consolidated finish Demerit Single Ply Lamination Available up to 2400mm width Available up to 2000mm width Low price High price Various fabric style Limited fabric style Laminated Belt general properties Product L6 L9 L10 L15 Reinforcing Fabric 2Ply Glass Fabric 3Ply Glass Fabric 2Ply Glass Fabric 3Ply Glass Fabric Coating Type PTFE with graphite filler PTFE with graphite filler PTFE with graphite filler PTFE with graphite filler Interlayer PTFE PTFE PTFE PTFE S.G.(Relative Density) 2.16 2.16 2.16 2.16 % Coating 66 66 58 58 Tensile Warp(N/5cm)Min 1000 1650 1600 2500 Tensile Weft(N/5cm)Min 800 1450 1400 2200 Tear Strength(BS)Warp(N) Min. 14 25 24 38 Tear Strength(BS)Weft(N) Min. 11 20 18 28 %Elongation at break warp Min. 2.5 2.2 3.2 3.0 %Elongation at break weft Min. 3.0 2.7 3.5 3.2 Weight (g/sqm)+/-5% 292 438 530 811 Nominal Thickness(mm) 0.15 0.23 0.25 0.38 Overlap thickness(mm)_Nominal 0.23 0.30 0.38 0.51 Surface Resistivity (m-ohms) Min. <10 <10 <10 <10 Operating Temp.(deg. C) -73 ~ 260 -73 ~ 260 -73 ~ 260 -73 ~ 260