Rolling Mill

FeaturesThe Rolls in various types of Rolling Mill Rotates in the robust frame which holds the stands supporting the rolls.Several Rolls are included in Multi-Stage Rolling Mill among which 2-Working rolls will Directly Contact with the Processing Metal where the rest of Back up Rolls support the Working Rolls. The smaller diameter of working roll gives higher efficiency where only a few mm in diameter of working rolls are used to produce metal foils.In general, several stages of passing metals into rotating working rolls and other operations are required to get normal products. Type of Rolling Mill / Skin Pass Mill and Products Type Product 2-Stage Small Products Reverse 2-Stage Big Products, Bloom, Thick Plate Double 2-Stage Small Products Non-Reversible 3-Stage Big Products, Bloom, Midium Plate 3- Stage for Steel products Big Products, Bloom, Midium Plate 2-Stage Continuous Sheet Bar, Wire Rods 4-Stage Thin Plate, Strip, Cold Press 4-Stage Continuous Strip, Cold Press 6-Stage Strip, Cold Press Universal Sections, Bar for Tubular Clasification- Classified by Operating Temperatures Type Cold Rolling Hot Rolling General Operating below Re-crystallization TemperatureMainly to Produce Sheet Plate Possessing Higher Internal Stress and Work Hardened Operating below Re-crystallization TemperatureMainly applied to bloomingCan Achieve Higher Reduction ratio(30%~50%) Features Increased Mechanical StrengthAllowing Smooth & Clean SurfaceAllowing Relatively Uniform Thickness Can Produce Ultra-Thin Sheets (Below 0.1mm)Can be Applied to Finishing / Machining Rolling[Terms of Mechanical Industry]Reduction Ratio 10 ~ 30% Requires Less Power ConsumptionCan Get Bigger ModificationRelatively Short Operation TimeAdopted for Mass Production Reduction Ratio 30 ~ 50%