Resistance Tester

KT-2000RD can preset four kinds of reference values (option). Testresult is displayed in numeric form with lamp (Green/Red).This model is manufactured on the basis of KAST's long experience, and designed against noise and impulse that might occur under the bad electric condition relating to other equipment. Common Specification Outputresistance Description Item Details (155 x 420 x 430 mm) 0~40KO Option : 0~200KO AC Power (50/60Hz) 110 /220V± 10 %. Range selection 6 range conversion of R Limit setting High/ Low resistance Error tolerance ± 0.5% 4 contact points 2 sensor/ 2 power ports Digital display 3 3/4 digit (14 x 8mm FND) Temp. correction1. OFF mode2. ON mode Temp. compensation1. 0.2 % ± 2 digit2. 0.6 % ± 2 digit Auto decision Good : Green lamp Bad : Red lamp & buzzer Measuring speed 100ms or less Serial comm. Port 8 data bit / non parity/ Baud rate 9600 bps Display of test result Temperature Correction Temp. correction for copper is based on ICEA S-68-516, ASTM B 193 or equivalent. R1 : resist. at reference temp.R2 : measured resist. at test temp.T1 : reference temp.(°C)T2 : test temp.(°C) Benefits No measuring error for low resistance value by four port contacts. More convenient by temperature correction. More accuracy- 0.2 %± 2 digit for OFF state of Temp. correction- 0.6 %± 2 digit for ON state of Temp. correction No breakage/ misoperation by noise-filtering circuit of multi-step. Easily connectable to other auto line. Calibration report ( ISO 17025 )