I. High Pressure Coolant System
For processing problem, chip blocking in automation process, etc. you can solve them by using high-pressure cutting oil now!
Low-pressure cutting oil (14kgf/cm2) is not able to pass through cutting heat curtain that take place from high-speed rotation processing being evaporated before reaching cutting area, which may not serve its proper function as a cutting oil.
Especially for CNC lathe and automatic lathe requiring high-precision, processing of the materials difficult to cut, complex processing, high-speed processing for muilti-product, it is necessary to use high-pressure cutting oil now!
Improvement in chip-treatment capacityHigh pressure cutting oil system enables smooth chip treatment in complex processing of the materials difficult to cut and automation process. Especially high-pressure cutting oil exceeding 70kgf/cm2 is effective in cutting the chips and discharging them.
Improvement in cutting speedImproved in general steel material and the materials difficult to cut by 20%
Improvement in tool lifeImproved in the process from rough grinding to finish grinding by 50%
II.Advantage of MF Series High Pressure Coolant System
Hole Processing / Through Tool Coolant
Supplying cutting oil to the point for processing at maximum pressure
Discharging chips effectively through the hole in the processing of the material difficult to cut
Extending tool life and improving cutting condition in the processing of deeper hole with diameter to be grinded
Turning/High Pressure Coolant
Directly spraying cutting oil at the processing area so as to reduce the occurrence of thermal zone in large scale
It enables to generate wedge effect by the pressure of cutting oil, and reduce wear of tool by cooling the contact area between chip and tool
Improving the discharge of chip by cutting chips into small pieces so as to prevent recutting by chip, and subsequently improving roughness and enhancing the life of tool
III. Characteristic of MF Series High Presssure Coolant System
Safety and Convenience
Adopting Sub Tank (Clean Tank) and Level Switch for continuous use in smooth manner
Applying low-noise high-pressure pump with high durability
Attaching Solenoid Valve for reasonable use of cutting oil
Ergonomically designed construction
Continuous Use
Dual type filter attached enables its conversion into stand by filter through conversion lever manipulation when replacing filter; Filter replacement without the suspension of machinery/system enables continuous use of machinery and automation.
Sensor is attached, which automatically marks the time for filter replacement.
Function of filter automatic-conversion; Option of Discharge Port Sol. Valve (Max. 8 Ports) can be selected
IV. Application of MF Series High Pressure Coolant System
CNC Lathe/Automatic Lathe
Improving processing speed in precise and complex processing of the material difficult to cut
Discharging chips smoothly in the processing of gun drill for small diameter
Separating and discharging chips easily from material, chuck or automated device in narrow space so as to enable automation process such as Bar Feeder.
Adopting the specification proper for CNC lathe and automatic lathe for convenient use
Small-type Machining Center, Tapping Center
Filtering & high pressure coolant system at economic price that is suitable for small type machining center, tapping center
In the case of using the machinery in cell form in continuous processing or automated line, it enables continuous operation without the stoppage of machinery or line
Suitable for the general process for Steel, AI, etc. (Drilling, Milling, Tapping, etc.)
In the case there are many fine chips in magnetic property such as casting process, etc. it would be efficient with magnetic filter used for pre-filter.
In the process having many fine chips, the effect may be reduced.
Result of Chip Control Test when High-Pressure Cutting Oil is used in CNC Lathe(Titanium-Ti6A14V, HRC30)
V. Technical Data -MF Series
Specifications
Unit
PFMF 30-20
PFMF 70-15
PFMF 120-10
PFMF 200-10
Max. Outlet Pressure
kgf/cm2
30
70
120
200
Flow(Discharge + Bypass)
LPM
13
14
9
9
Motor
KW
1.5
4.0
4.0
7.5
Voltage Specification/3 Phase
VAC
220/380
Current value
A
7.0/4.0
14.6/8.4
14.6/8.4
28/15.5
Frequency
Hz
50/60
Inlet Side Piping Specification
Inch
Rc 1/2
Outlet Side Piping Specification
Inch
Rc 3/8 JIS
Overflow Piping Specification
Inch
Rc 1-1/2
Max. Operating Pressure
Bar
30
70
120
200
Standard Orifice Diameter
Ø(mm)
1.5
1.5
1.0
1.0
Max. SOL Quantity Attached
EA
4/8
4/8
4/8
3
Quantity of Filter
EA
2
Grade of Filter
µm
10,25,50
Tank Capacity
Liter
80
90
External Size
WxDxH
1030x580x1340
1070x580x1420
Weight
kg
160
173
173
190
Standard Color
Light Gray
.Flow means the flow at maximum pressure..Max. pressure is baded on Standard Orifice..Be sure to consult with us for special voltage specification..The afore-mentioned specification is subject to change depending on the company's circumstance..R and Rc mean the codes of ISO standard for PT male screw and PT female screw respectively.
High Pressure Coolant System -MF Sereis
Description
Product Inquiry
Purchase Product Catalog
Payment & Shipping Conditions:
- Payment: We accept payment through Paypal Only.
- Shipping: We will ship the catalog once the payment is received. And you will be receiving the catalog with in 10 -14 busines days. Shipping might be delayed in due to international shipping conditions which is depends on the countries receiveing. In case hard copy of catalog is not available then we will ship the soft copy.
- Refund: We can refund the order before shipping process was initiated. Incase Catalog not available, we will make sure to refund the order.
- Note: This is a Catalog Produt.
Share High Pressure Coolant System -MF Sereis in Social Media