Step Motor Driver and Network Based Motion...

Description The Ezi-SERVO® Plus-R is an innovative closed loop stepping motor control system with an integrated Motion Control. The Ezi-SERVO® Plus-R utilizes a high resolution encoder to update the motor position every 25 micro-seconds. Using high performance DSP technology(digital signal processor) and software, the drive ensures exact position, no overshooting and smooth motion. The drive Features Network Based Motion Controller, Position Table Function, Constant Closed Loop Control, No Gain Tuning, No Hunting(It does not experience a fluctuation and vibration of motion), Smooth & Accurate Positioning, due to the high resolution of encoder(10000, 20000 and 32000 PPR), Fast Response, High Torque, High Speed, Load Dependent Current Control. Ezi-SERVO®Motors are available in NEMA 8, 11, 17, 23, 24 and 34 configurations. The integrated Motion Control can be linked up to 16 axes and can be operated from a PC through RS-485 communication. All of the motion conditions are set through theintegrated network and saved in flash ROM as a parameter. FASTECH Motion Library(DLL) is provided for programming under Windows 2000/XP. Position tables are used for motion control by digital input and output signals from host controller. You can also operate the motor directly by sending the position table number, start/stop, origin search and other digital input values from a PLC. The PLC can monitor the In-Position Status, Origin Search, Move/Stop, Servo Ready and other digital output signals from a drive. A maximum of 256 positions can be saved in flash ROM memory.