Open Bag Making Machine

Features 3 sets of rubber roller with D.C motor and photocell for infeeding film roll Double purposed sealing heater (T-shirts bag & open bag) Elevator for delicate adjustment of bag length Sealing heater and cutting knife operated by the Main motor through the cam. 3 sets of mark sensor for printed film Table for stacking bags General Specification Application film a) HDPE, LDPE, PE, PP Max. width & length of finished bags (Depending on case) a) Max.1000mm(L) * 700mm(W) ---1line b) Max.1000mm(L) * 330mm(W) ---2lines c) Max.1000mm(L) * 230mm(W) ---3lines Bag production (Depending on the material, length and thickness) a) 270bags/min in 3lines (90bags/1 line) Input power a) By buyer's request Dimensions a) 3900mm(L) x 1287mm(W) x 1840mm(H) Detailed Specifciaotn 1 Electrical part a) Main input power : Buyer's requestb) Main motor : 3P 2Hp A.C motor (Korea brand)c) Main inverter : 1.5kW (Misubishi brand) d) Driving motor to the infeeding rubber roller : 3sets (1/4Hp D.C motor-Korea brand)2 Unwinding part a) Steel shaft for Film roller : 2sets (Steel shaft manual type)b) Infeeding rubber roller : 3sets (1set is 800mm, 2sets are 350mm)c) D.C motor to the infeeding rubber roller : 3sets (1/4Hp D.C motor-Korea brand)d) Photocell to control the film infeeding : 3sets (Korea brand)e) Detector for discontinuance of film infeeding 3 Sealing & cutting part a) Mark sensor to detect the printed film : 3sets with control box (Korea brand)b) Sealing heater operated by the main motor : 1set ( Double purposed for T-shirt & Open bag): Driven by Main motor through camc) Cutting knife : 1set ( Driven by Main motor through cam)d) Elevator for adjustment of cutting position : 1set4 Main feeding part a) Main feeding rubber roller : 1set (Upper & Lower)b) Driving unit for feeding rubber part : By clutch bearing & brake5 Exhausting part a) Pin heater to fix the finished bags into a bundle : 3sets b) Guide Bar to push out the bags on the table : 1set (Operated by Air cylinder) c) Table for stacking : 1set Exclusions from Taejin Machinery's Supply Scope Foundation and Installation works and materials. Remodification and reinforcement of the buildings and/or Fixtures for the installation of equipment. Seller is free from any resposibility from Items not specified in the estimates and/or Specifications sheet. Remarks 1year warranty after installation Mechanical & electrical spare parts provided Fast & kind after-sales service Allowable fluctuation of the primary voltage is within ±5% This specification is subject to change without prior notice for improvement