Analyzer

Analyzer SPTCP-5C (Dust Analyzer) The P-5C Particulate Monitor performs continuous, nonextractive mass concentration measurement – simply and reliably – in a wide variety of applications. -. Single-ended, Self-aligned Instrument Mounts to standard ASA flange, with no requirements for alignment or opposite wall access, resulting in low installation costs. -. Ready to Operate Complete with internal zero and reference calibrations, purge system, and protective covers.  Comes with integral purge system and protective covers. Installs in minutes, operated and calibrated by non-skilled plant personnel. -. Rugged DesignProven reliability for 20+ years in abrasive and/or corrosive applications. -. Meets Regulatory RequirementsHas passed US EPA PS 11 Requirements. Ideal for CAM applications. -. Minimal ConsumablesSave time, money and inventory stocking. -. Specifications Measurement Range1 – 20,000 mg/actual m3Scale RangesDual ranging, user selectable anywhere within the measurement range.Detection Limit 0.5 mg/Am3StabilityZero and Span DriftShort Term (2Hr.) – Less than 1% full scale LongTerm (24Hr.) – Less than 2% full scaleResponse Time Approximately 3 secondsCalibrationInternal system automatically performs a low level (Zero) and upscale Span cycle at intervals initiated by internal clock or by external data system command (contact closure). External calibration tube provides traceable values for reference calibrations and instrument audits.Ambient Temperature -30°C to 55°CProcess Gas TemperatureTo + 260°C standard, to + 375°C with highTemperature probe option.Process Gas PressureTo + 130mm H2O standardTo + 375mm H2O w/High Volume PurgeBlower Option.Process Gas Velocity Instrument operation is Independent of gas velocity.Power Requirements110° ± 15Volts AC, 60Hz, 6A(220V, 50Hz optional)Output4-20MA, 550 ohms maximum resistance. -. Installation Information PIPE Size:Mounts into standard 4” (or larger) pipesMounting FlangeASA standard 4”(150#) flange (9”OD, with eight, 3/4” diameter bolt holes on 7 1/2” diameter B.C.)Probe LengthDistance from mounting flange to center of sampling volume – 18”, 36” or 60” standardPhysical DimensionsProbe length plus 30 1/2” long x 12 1/2” wide x 18” high Weight 125 – 140 pounds -. Optional Equipment High Pressure Purge SystemFor process gas pressures in excess of + 130mm H2O High Temperature Probe OptionFor temperatures from 260 C up to 375°C maximum Output CableComplete with connector, lengths to 500 feet. Plant Air Backup WARRANTY Twelve (12) month return-to-factory warranty.Specifications subject to change without notice