Waterproof IP 66/67 rating up to 3 ft fully submerged
Provides 85 dB tone and bright LED indication on alarm (typical)
3-year battery life (9,000 hours)
Available with internal vibrating alarm
Equipped with plug-in, replaceable sensor
Simple auto-zero and calibration procedure
Peak value displayed on command (in ppm or %)
TWA (time weighted average) values are recorded and displayed to evaluate the cumulative exposure danger and to aid regulatory compliance
Classified intrinsically safe by UL to U.S. and Canadian standards; Cenelec certified; certified in Australia
Full function self-test of: sensor, battery, circuitry integrity and audible/visual alarms
Small size (1.1 x 2.0 x 3.75 in. / 28 x 50 x 95 mm) and lightweight (2.9 oz. / 83 g)
LOW, HIGH, TWA and STEL alarms with adjustable setpoints
Pocket/belt clip, test cap and hose, battery, and instructions in local languages includedSpecifications:Measuring Range: 0-999 ppmAlarm Set Points:TWA Alarm: 35 ppmSTEL Alarm: 200 ppmLow Alarm: 35 ppmHigh Alarm: 200 ppmRelative Humidity: 15-90Operating Temperature: -30 - 50°C (-22 - 122°F)Auto zero: YesCalibration: AutomaticBacklight: Low light (auto); alarm condition (auto); on demandFull function self-test: Verifies integrity of sensor, circuitry and battery; audible/visual alarmsSensor: Plug-in, electrochemical cell (temperature compensated)Indicators And Alarms: Clearly advises alarm levels both visually and audiblyVisual alarm: Flashing, wide-angled alarm lens with dual red LEDs, plus alarm LCD readoutAudible alarm: High-output, pulsing 85 dB at 1 ft. / 0.3 m (typical)Confidence beep: Every 5 seconds (field-selectable)Other: Low battery; off warning; sensor failOptional internal vibrator: Vibrates in sync with audible and visual alarmsContinuous LCD Display: Alphanumeric gas readout and status displayGas ppm or %: Continuously displays gas concentration presentTWA and STEL ppm or %: Records and displays on demandPeak ppm or %: Records and displays peak (maximum) exposure to gas on demandSetpoints: Displayed on activation (auto) and on demand in ppm or %TestsFull function self-test: Full function self-test on activation (auto)General Specifications: Impact-resistant ABS enclosureHumidity: 5% to 95% RH (non-condensing) (15% to 90% non-condensing for PH3 and NH3)EMI/RFI: Complies with EMC Directive 89/336/EECBattery type: 3-volt lithium (camera battery available locally)Battery life: 3 years (9,000 hours)Size: 1.1 x 2.0 x 3.75 inches / 28 x 50 x 95 mmWeight: 2.9 oz. / 83 g
BW Carbon Monoxide CO gas detector GAXT-M-...
Description
Product Inquiry
Purchase Product Catalog
Payment & Shipping Conditions:
- Payment: We accept payment through Paypal Only.
- Shipping: We will ship the catalog once the payment is received. And you will be receiving the catalog with in 10 -14 busines days. Shipping might be delayed in due to international shipping conditions which is depends on the countries receiveing. In case hard copy of catalog is not available then we will ship the soft copy.
- Refund: We can refund the order before shipping process was initiated. Incase Catalog not available, we will make sure to refund the order.
- Note: This is a Catalog Produt.
Share BW Carbon Monoxide CO gas detector GAXT-M-... in Social Media