BW Carbon Monoxide CO gas detector GAXT-M-...

Additional Information   Waterproof IP 66/67 rating up to 3 ft fully submerged Provides 85 dB tone and bright LED indication on alarm (typical) 3-year battery life (9,000 hours) Available with internal vibrating alarm Equipped with plug-in, replaceable sensor Simple auto-zero and calibration procedure Peak value displayed on command (in ppm or %) TWA (time weighted average) values are recorded and displayed to evaluate the cumulative exposure danger and to aid regulatory compliance Classified intrinsically safe by UL to U.S. and Canadian standards; Cenelec certified; certified in Australia Full function self-test of: sensor, battery, circuitry integrity and audible/visual alarms Small size (1.1 x 2.0 x 3.75 in. / 28 x 50 x 95 mm) and lightweight (2.9 oz. / 83 g) LOW, HIGH, TWA and STEL alarms with adjustable setpoints Pocket/belt clip, test cap and hose, battery, and instructions in local languages includedSpecifications:Measuring Range: 0-999 ppmAlarm Set Points:TWA Alarm: 35 ppmSTEL Alarm: 200 ppmLow Alarm: 35 ppmHigh Alarm: 200 ppmRelative Humidity: 15-90Operating Temperature: -30 - 50°C (-22 - 122°F)Auto zero: YesCalibration: AutomaticBacklight: Low light (auto); alarm condition (auto); on demandFull function self-test: Verifies integrity of sensor, circuitry and battery; audible/visual alarmsSensor: Plug-in, electrochemical cell (temperature compensated)Indicators And Alarms: Clearly advises alarm levels both visually and audiblyVisual alarm: Flashing, wide-angled alarm lens with dual red LEDs, plus alarm LCD readoutAudible alarm: High-output, pulsing 85 dB at 1 ft. / 0.3 m (typical)Confidence beep: Every 5 seconds (field-selectable)Other: Low battery; off warning; sensor failOptional internal vibrator: Vibrates in sync with audible and visual alarmsContinuous LCD Display: Alphanumeric gas readout and status displayGas ppm or %: Continuously displays gas concentration presentTWA and STEL ppm or %: Records and displays on demandPeak ppm or %: Records and displays peak (maximum) exposure to gas on demandSetpoints: Displayed on activation (auto) and on demand in ppm or %TestsFull function self-test: Full function self-test on activation (auto)General Specifications: Impact-resistant ABS enclosureHumidity: 5% to 95% RH (non-condensing) (15% to 90% non-condensing for PH3 and NH3)EMI/RFI: Complies with EMC Directive 89/336/EECBattery type: 3-volt lithium (camera battery available locally)Battery life: 3 years (9,000 hours)Size: 1.1 x 2.0 x 3.75 inches / 28 x 50 x 95 mmWeight: 2.9 oz. / 83 g