New Type Oil remover and Oil absorbant

New Type Oil remover and Oil absorbant

Oil Remover & Oil absorbant.

This is the new type the Oil Remov er & Oil absorbant.

It has extract from the perallite with very light specific gravity.

It has much effect to remove and abosorbance power the Oil spills.

And It can use widely application for The oil spilles in the sea. Land, Auto Car center,

Oil storage place..It also can extract the spill and recycle with eco friendly.

It can protect the Oil spill with Eco friendly (New developed item for Oil spill and absorbant)

Summary of Oil remover with absorbant

· This Oil remover is a micro-processed porous inorganic substance made by natural mineral heated at over 1000°c and expanded.

· Specific gravity is a physical property of 0.05~0.1.

· Stirring Pearlite Oil remover with seawater and spraying it with high-pressured fire pump.

· Spraying within a 50m radius is capable.

· This Pearlite Oil absorbs oil spill selectively floating on the surface of water since its specific gravity is less than 0.1.

· Preventing oil diffusion with sticking properties forming large cluster.

· Solving existing problem regarding residual styrofoam by using This Pearlite

Oil removeras an oil fence

Defects of the Existing Oil Spill Removers(compare to exhisting)

1) Causing secondary pollution : Emulsifying agents

- Destroying environmental ecosystem with sunk emulsifying agents under the sea

2) Difficulty in removing oil swiftly : Felt

- Incineration of used felt causes another pollution

3) Heavy labor cost : Felt

- Using the felt arouses a lot of production costs (labors, equipment.

4) Recycling is not available : Emulsifying agents and Felt

5) Difficulty in handling wide spill area : Felt

Advantages of This Oil Remover

1) Eco-friendly : No secondary pollution, No ill-affects

on ecological system

2) Economical : Save labor cost (1/30 of labor cost comparing to other methods)

3) Swift removal: Immediate collection after sparying within a 50m radius area

4) Recyclable: Reusable after seperated into Oil and Pearlite

through centrifugal filtration.

5) Simulataneous spraying on the sea and on the land

6) Oil fence

The Solving Process of Pearlite Oil Remover

Unit Requirements and Human Resources

1)Tugboats x 2

2) High pressure fire pump

3) Fishing net (1Mx20M)(10mm Mesh) x 2 Set

4) Collection Bag (1Mx5M) (2mm Mesh)

5) Centrifugal separator for oil separation

6) Required workers : 2 people

7) Incinerator (if necessary)

8) Oil refinement device

Pearlite Requirement and Forwarding Cost

1) Cost of producing Pearlite

2) Requirments per 1m2 : 2L Approx. 200g

3) Requirments per 1m3 : Approx. 100kg

Proposal

· Approx. 25,000km2 oil cluster has been formed from April 20th to June 10th

· Using a felt is not available

· Avoid using emulsifying agents for environmental protect

· Supply Pearlite at the site after building Pearlite processing facility in Mexico Gulf (Installation period : 4 months)

· Recycling is possible more than 3 times after centrifugal separator installation

· Initial completed product = Export

- Producing and Recycling in the field can be done continuously once the facility is installed

· Lower cost, faster removing and eco-friendly.

Pearlite is the optimum solution for mega oil cluster in the gulf of Mexico.

Reference : An analysis table for Pearlite Oil Remover

**Application Field

* The oil spilles in the sea.

* The oil spilles in the Land

* Auto Car center

* Oil storage place

* Oil Fence with this Eco Friendly Oil remover.

* Recycle the oil spilled.

* The ship engine room. It can use any Oil spilled..