Measurement System

FOx-001 All In One Network Test Solution Fox(Fiber of Optics X-position) has comprehensive of handheld instruments and functions, offers a complete solution for optical field tests, The range includes power meter/loss measurement, light source, BER test and even SFP transceiver drivers and complete test kits for every application for FTTx-PON or CATV network to complete mission with great convenience and optimized solution. Features Optical source of three SM wavelength ? : 1310nm, 1490nm, 1550nm Power : -20dBm ~ +3dBm Optical power measurement and loss test dBm / mW unit conversion Auto loss testing function by one button PASS judgment by preset threshold BERT signal generation PRBS length : 2N-1 (N=7,15,23,31 & Clock) Max. 2.5Gbps PRBS pattern generation Eye diagram visualization Supporting 125Mbps, 155Mbps SFP type Transceiver available in BERT application Auto Optical Loss Test Easy and Comfort This function offers fast, easy operation on optical loss testing at various kinds of wave lengths and optical powers. By executing single button, 12 kinds of loss results can be obtained Pass Judgment The results are displayed as table form and it offers pass information comparing with preset threshold. Auto Detection PRBS A pair of FTT-1000 and Fox-001 are necessary for BER testing. A pair of FTT-1000 and Fox-001 are necessary for BER testing. Whenever one device sends PRBS to another one, receiver detects PRBS pattern and pattern BER testing automatically. Trigger signal or external clock is not needed High Speed Signal Various and high speed signals can be generated 125Mbps, 155Mbps, 622Mbps, 1.25Gbps, 2.5Gbps Eye diagram Eye diagram is embodied in handheld tester.(support 125Mbps, 155Mbps) Optical Source / Power Loss FOx-002 PPG and Electrical BER Testing Fox-002 allows PRBS pattern generation and BER Testing for Ethernet-PON and WDM-PON test even electrical field. It is designed to assist network service provider to install perform function test of transmitters, receivers and networks for FTTx-PON. Features PRBS pattern generation and BER test 2ch signal output and 1ch signal input High speed rate signal 125Mbps, 155Mbps, 622Mbps, 1.25Mbps, 2.5Gbps BER signal PRBS length : 2N-1(N=7,15,23,31 & Clock) Loop back test applicationAutomatic PRBS pattern recognitionEye diagram visualization supporting 125Mbps, 155Mbps SMA connector Application Ethernet-PON and WDM-PON network system or module test FOx-003 General SFP Transceiver for BERT Fox-003 satisfies various customers requirement. Engineer can adapt any type of SFP transceiver module. It is also designed to support optional wavelengths and fiber type. Features Simultaneous Control of two SFP channels High speed rate signal 125Mbps, 155Mbps, 622Mbps, 1.25Mbps, 2.5Gbps BER signal PRBS length : 2N-1(N=7,15,23,31 & Clock) Loop back test application Automatic PRBS pattern recognition Various PRBS Pattern Generation BERT & ERROR Detecting Function(Loop-back Test or External PRBS Data Test) Applications Ethernet-PON & WDM-PON Network Test FTTx ONT or ONU Module Development Loop-back Test, Optical Line or System Test Transceiver Function Test ck test application Automatic PRBS pattern recognition Various PRBS Pattern Generation BERT & ERROR Detecting Function(Loop-back Test or External PRBS Data Test) Applications Ethernet-PON & WDM-PON Network Test FTTx ONT or ONU Module Development Loop-back Test, Optical Line or System Test Transceiver Function Test