3003 LF21 3A21 3004 aluminum sheet/plate

3***Features 1. As the main alloying element in Mn alloy. 1.0-1.6% 2. Antirust aluminum plate 3. Non-heat-treatable alloy 4. high plasticity, good welding performance, strength is higher than 1 XXX series aluminum alloy, and corrosion resistant performance is close to 1 XXX series aluminum alloy. Anti-rust material, anti-corrosion, good welding, easy to be shaped, 5. Conventional application in air conditioning, refrigerator, humid environments, such as car., bottle-cap, heating-exchanger sheet, printing sheet, building material, container for liquid.   Chemical composition limits wt% Cu:0.05-0.2;  Si:0.6;  Fe:0.7;  Mn:1.0-1.5;  Zn:0.1;  Al: allowance   Typical mechanical & physical properties Weldability: very good Machinability: bad Corrosion resistance: very good  Conductivity 20?(68?)(%iacs): 50-55 Density(20?)(g/cm3): 2.73 Strength of extension(25°c mpa): 150 Yield strength(25°c mpa):145 Ductility(1.6mm(1/16in)):8-16 Maximum shearing stress: 95     LF21   Main characteristics and application scope 1. AL - Mn series alloy. 2. One of the most widely used antirust aluminum. 3. Strength is not high (slightly higher than that of industrial pure aluminum) 4. Can't heat treatment to strengthen, the cold working method is adopted to improve its mechanical properties. 5. In annealing state has high plasticity, in a cold work hardening plasticity is good, when the cold work hardening plasticity is low. 6. Good corrosion resistance, good weldability, cutting performance is not good. 7. Mainly used for high requirement of plasticity and weldability, working in a liquid or gas medium low load parts, such as fuel tank, gas or oil duct, and other various liquid containers made of deep drawing parts: small load wire used for rivet.   3003 Good forming property, high corrosion resistance, good weldability and conductivity, strength is higher than in 1100.   Widely used in kitchen utensils and appliances, food and chemical products processing and storage equipment, transportation of liquid products tank, tank, with thin plate processing all kinds of pressure vessel and piping, heat exchanger, rivets, welding wire, washing machine, cylinder, etc.   Size of the sheets Alloy grade Temper Thickness(mm) Width(mm) Length(mm) 3A21(LF21)3003 3004 O(M) 0.3-10 1000-1500 =6000 H14/24(Y2) 0.3-6.5 1000-1500 =6000 H18/28(Y) 0.3-6.0 1000-1500 =6000 F.H112(R)* 5-50 1000-1600 =6000