E-type Connector

1. Effectiveness Reducing resistance in connectionConnection method in between Binding and E-type copper connecter (sleeve), there are more than 90% resistance reduction with the increase of adhesion density when using of E-type copper connecter (sleeve) Prevention of short circuit (wire breaking) Prevention of burst and short circuit (wire breaking) based on low resistance and high adhesion density Prevention against loss of electric power supplySaving electric power loss of 500,000Kw per every hour by replacing the existing Binding system with new Copper Connecter (Sleeve) system. Increase in working efficiencyProduct provides easy setup (work done) and prevents defect connetion by using pressurized tools 2. Usae This product is used where needs complete connection in the area (part) of that tension is not applied, amongst connecting method of low voltage (copper) wire of distribution line.  1)  Joint connection for second lead line from a transformer  2)  Joint connection in Low voltage branch cable  3)  Connection in between low voltage-drop wire  4)  Connection in between ground wire and ground bar  5)  Joint connection of Underground low-voltage main line with grounding wire  6)  Copper connection of transformation / transmission of electrical energy's private branch facilities   7)  Other copper wires and its multidrop areas.          * Beveling is based on order 3. Comparison between E-Type Copper Connection and Binding connection 4. Characteristic of Product and way to setup Unified all the external connecter (sleeve) sizes into 48mm and adjusted internal density by using different size bars make it possible to set up all different sizes without exchange of dies (UD3). The hardness and size of wire are delicately manufactured to fit its standards, that prevents use for other purpose and bad connection 5. Required tools Tools: Y-35, Y-46 (dies: UD3) 6. Product types and standard size (Registration Number 109, KEPCO's material storage) KEPCO's products No Title wire size(mm) Tools Compression Installing Dies run tap 114-190 DSC 1A CU 22,38 CU 3.2 Y-35 1 time UD-3 114-191 DSC 2A CU 60 CU 3.2 Y-46 114-192 DSC 1B CU 22 CU 22 114-193 DSC 2B CU 38 CU 38,22 114-194 DSC 3B CU 60 CU 22 114-195 DSC 4B CU 60 CU 38 114-196 DSC 1C CU 60 CU 60 2 times 114-197 DSC 2C CU 100 CU 38 1 time 114-198 DSC 3C CU 100 CU 60 2 times 114-199 DSC 4C CU 100 CU 100