ASTM A792 / A792M-097
Standard Specification for Steel Sheet, 55% Aluminum-Zinc Alloy-Coated by the Hot Dip Process>
Scope
This specification covers 55% aluminum-zinc alloy- coated steel sheet in coils and cut lengths.
This product is intended for applications requiring corrosion resistance or heat resistance, or both.
This product is produced in a number of designations, types, and grades which are designed to be compatible with differing application requirements.
Terminology
Definitions-See Terminology A902 for definitions of general terminology relating to metallic-coated hot-dip products.
Definition of Term Specific to This Standard.
Regular spangle-the unaltered 55% aluminum-zinc(Al-Zn) crystal structure that occurs during normal solidification of a hot-dip coated steel sheet.
Classification
The material is available in several designations, as follows;
Commercial Steel-CS Type A, B, and C,
Forming Steel-FS
Drawing Steel-DS
High Temperature Steel-HTS, and}
Structural Steel-SS.
Structural steel is available in several grades based on yield strengths and tensile strength.
The product is available in several coating weights [masses]with the coating designation.
Coating Designation and Minimum Coating Test Limits
Coating Designation
Triple-spot Testmin.g/m2 min oz/ft2
Sing-Spot Test min g/m2 min oz/ft2
AZM 150 AZ 50
150 0.50
130 0.43
AZM 165 AZ 55
165 0.55
150 0.50
AZM 180 AZ 60
180 0.60
155 0.52
EN 10215/1995
Continuously Hot-Dip Aluminum-(AZ)Coated Steel Sheet and Strip(Technical Delivery Conditions)
1. Grades and Mechanical Properties of Low Carbon steels for Cold Forming
Designation
Yield Strength ReN/mm2max.1) 2) 3)
Tensile StrengthRe N/mm2max.1) 3)
ElongationA80%min.1) 4)
Steel Grade
Symbol for theType of Hot-DipCoating
steel Name
Steel Number
D X 51D
1.0226
+AZ
-
500
22
D X 52D
1.0350
+AZ
3005)
420
26
D X 53D
1.0355
+AZ
260
380
30
D X 54D
1.0306
+AZ
220
350
36
1) The values apply to transverse test pieces2) The yield strength values apply to the 0.2% proof stress if the yield point is not pronounced, otherwise to the lower yield strength(ReL)3) For all steel grades a minimum value of 140 N/mm2 for the yield strength (Re) and of 270 N/mm2 for the tensile strength (Rm) may be expected4) For product thickness <0.7mm the minimum elongation values(A80)shall be reducedby 2 units5) This value applies to skin passed products only(surface qualities B and C)
2.Grades and Mechanical Properties of Structural Steels
Designation
Yield Strength ReN/mm2max.1) 2) 3)
Tensile StrengthRe N/mm2max.1) 3)
ElongationA80%min.1) 4)
Steel Grade
Symbol for theType of Hot-DipCoating
steel Name
Steel Number
S250GD+AZ
1.0242
+AZ
250
330
19
S250GD+AZ
1.0244
+AZ
280
360
18
S250GD+AZ
1.0250
+AZ
320
390
17
S250GD+AZ
1.0529
+AZ
350
420
16
S250GD+AZ
1.0531
+AZ
550
560
1) The values apply to transverse test pieces2) The yield strength values apply to the 0.2% proof stress if the yield point is not pronounced, otherwise to the upper yield strength(ReH)3) For product thickness < 0.7mm the minimum elongation values(A80) shall be reduced by 2 units
3. Coating Mas
Coating Designation
Minimum Coating Mass, g/m2 Total Both Surfaces
Triple Spot Test
Single Spot Test
100
100
85
150
150
130
185
185
160
1) A coating mass of 100 g/m2 corresponds go a coating thickness of approximately 13.3µm on
Specific uses
Industrial
Roofing material Internal Wall Ceiling Fence
Muffler Exhaust Silence Boxes Tail pipe Oil filter Tube Hose Clamp Brake Pad Cover
Banding machine Washing machine Microwave ovens pan style="font-size: x-small;">200
170
SPECIFIC USES
Power distribution board , Air conditioning components, Shutter door, Roofing material, Internal wall
* Thickness : 0.40 mm ~ 2.30 mm
* Width : 800 mm ~ 2300 mm
* Min. Order Quantity : 20 ~25 MT / one 20ft container
* Packing : export standard steel packing (coil - horizontal, vertical / sheet - according to customer's order)
* Price : FOB Busan (negotiation with Mill's) + sea freight + commission + insurance premium
* Payment Term : T/T advance 20%, L/C at sight, L/C 90 days from B/L date
* Delivery Time : 45 ~ 60 days from L/C or Mill's option
Alu-zinc Alloy Coated Steel Sheet & Coil (...
Description
Product Inquiry
Purchase Product Catalog
Payment & Shipping Conditions:
- Payment: We accept payment through Paypal Only.
- Shipping: We will ship the catalog once the payment is received. And you will be receiving the catalog with in 10 -14 busines days. Shipping might be delayed in due to international shipping conditions which is depends on the countries receiveing. In case hard copy of catalog is not available then we will ship the soft copy.
- Refund: We can refund the order before shipping process was initiated. Incase Catalog not available, we will make sure to refund the order.
- Note: This is a Catalog Produt.
Share Alu-zinc Alloy Coated Steel Sheet & Coil (... in Social Media