Cold Rolled Steel Strip in Coil

CharacteristicsCold rolled special strip is named high carbon steel strip, which contents carbon 0.20~1.5% and special alloy steel included Mo, Mn, Cr, V, Ni,. Their main applications are suited for machine parts in need for improving fatigue limit by the heat treatment such as carburizing, quenching & tempering.With control of chemical contents, non-metallic inclusion and spheroidizing, the manufacturing characteristics guarantee workability & Heat treatment ability required by customer. It should be sternly managed more than mild steel strip in gauge control system and flatness control system, which is essential to main uses of machine parts. Therefore we have changed 4hi-Mill into 6Hi-Z-Mill for innovation of production process. Tolerance on thickness Thickness Standard Tol. Special Tol Width 200 Excl Width 200 Over S SS 0.10 Over 0.15 Excl ±0.010 - ±0.008 ±0.005 0.15 Over 0.25 Excl ±0.015 ±0.020 ±0.010 ±0.008 0.25 Over 0.40 Excl ±0.020 ±0.025 ±0.015 ±0.010 0.40 Over 0.60 Excl ±0.025 ±0.030 ±0.020 ±0.010 0.60 Over 0.90 Excl ±0.030 ±0.040 ±0.020 ±0.015 0.90 Over 1.20 Excl ±0.040 ±0.050 ±0.030 ±0.020 1.20 Over 1.60 Excl ±0.050 ±0.060 ±0.040 ±0.030 1.60 Over 2.10 Excl ±0.055 ±0.070 ±0.040 ±0.030 2.10 Over 3.00 Excl ±0.065 ±0.080 ±0.050 ±0.040 3.00 Over 4.00 Excl ±0.080 ±0.090 ±0.065 ±0.050 Remark1. Thickness check point must be on any points of 10mm and over from the edge, incase of 20mm under in width, it must be on center point of width.2. Shteel strip of more accurate thickness than above tolerance limit can be manufactured in accordance with customer's request. Tolerrance on width Thickness Standard Tol. Special To. Width 200 Excl Width 200 Over Width 200 Excl Width 200 Over 0.25 Over 0.60 Excl ±0.15 ±0.25 ±0.10 ±0.15 0.60 Over 1.20 Excl ±0.2 ±0.30 ±0.15 ±0.20 1.20 Over 4.00 Excl ±0.25 ±0.40 ±0.20 ±0.25 *Remark 1. Steel stip of more accurate width than above tolerance limit can be manufactured in accordance with customer's request. Temper Grade Distinection Temper Symbol Remark Cold rolled R As cold reduced condition Annealing A Annealed after cold reduced Skin Passed S Skin passed after annealed Camber Tolerance Distinction Standard Tol. Special Tol. Remark As per 2000 length   20 Excl under - 12   20~40 Excl - 8   40~80 Excl - 4   80 and Over 4 2   Remark : The camber tolerance of stip is indicated by the deviation of the edge from a straight line in an arbitrary 2m section of the strip.