MAESTRO[Hyundae Meditech]

MAESTRO[Hyundae Meditech] [ korea manufacturers / korea suppliers / korea product ] Real Cooling Multi - RF SystemLow stimulus, optimal effectMultiple electrode high-frequency therapy equipment Product Features Best Service for Human HealthMaestro In order to enable Bi-Polar high frequency and Mono-Polar high frequency to be used at the same time, the large output power on a mono-Polar basis has been fine-turned so that it can be applied to Bi-Polar one as well. In case of Bi-Polar high frequency, the electro-repulsion function between poles has been strengthened and changed from the fast Bi-Polar way to Multi-Polar way, making Quad-Polar one possible. In this way, the treatment time has been reduced and more intensive treatment has become possible. To protect skin that can be indirectly damaged from high frequencies as possible, the cooling function was additionally installed to high frequency pole. As a result, the skin protection and more aggressive high-frequency pain treatment has become possible. By generating electrical pulse at the micro-second level under 100voltage of simultaneous high-frequency poles, electroporation technologies creating temporary pores on the skin horny layer, combined with cooling function reduced the level of stimulation and generate higher instant pulse of high voltage. Therefore a higher skin penetration effect can be expected than the past electroporation. In addition, the non-infiltrative and risk-free electrical way of the penetration is safer than a topical anesthetic such as Lidocaine, injected for temporary pain alleviation. Specification Quad-Polar(Bi-Polar) -Frequency : 450KHz±10%, Sine Wave-Output Voltage : Max 780Vp-p±10%, at 500 Load-Output Current : 0.55A±10%, at 500 Load-RF Generator Power : Max 150W±10% at 500 Load-Mode : CW, 0.5S, 1.0S-Cooling : 0~10°C Mono-Polar -Frequency : 1.0MHz±10%, Sine Wave-Output Voltage : Max 350Vp-p±10%, at 100O Load-Output Current : 0.6A±10%, at 100O Load-RF Generator Power : Max 150W±10% at 100O Load-Face,Body, Multi Cooling Electroporation -Frequency : ~20KHz-Output Voltage : ~40V-Output Current : Under 100mA-Cooling : 0~10°C-Mode : Pulse+, Pulse-