Products related to marina facilities

Products related to marina facilities

- Name: pontoon (A)

- Material: P.E.(high-pressure polyethylene)

- Standards: can be made in various ways depending on the required structures

- Weight: 100kg or below/each

- Buoyancy:1300kg/each

- Usage: maroons for yachts, water leisure facilities, fishing areas, and floating piers

- Features: as there are four water injection holes on the top of the pontoon, it is easy to carry out the maintenance work. The center hole and the groove at the bottom will keep the balance and prevent shaking. Use of eco-friendly materials. Can be expressed in diverse colors and designs.

- Name: pontoon (B)

- Material: E.P.S + Polyurea

- Standards: L1990 x 1490 x H600.Can be made in various ways depending on the required structures

- Wight: 90kg or below/each

- Buoyancy: 1300kg/each

- Usage: maroons for yachts, water leisure facilities, fishing areas, and floating piers

- Features: the water contained in the hole for settling on the water surface will partially flow in the central shaft, allowing the pontoon to keep the balance even in powerful waves and winds.

Can be custom-made as ordered. The buoyancy (height) of the pontoon can be also adjusted

The maintenance cost is low. Can be expressed in diverse colors and designs.

- Name: pedestal

- Material: aluminum

- Standards: 205 x 205 x 800. Can be made according to the desired functions

- Usage: for supplying electricity and water to the marooned yachts

- Features: lights for identifying things at night. Air-blowing units for preventing internal condensation. Access hole for making it easy to conduct maintenance. Can be expressed in diverse colors and designs.

- Name: cleat

- Material: aluminum, stainless steel.

- Standards: 200 x 150 x 200. 270 x 110 x 50. Can be made according to the desired usage

- Usage: for fastening ropes for the marooned yachts

- Features: can be made in diverse designs. Maintenance is easy

- Name: photovoltaic cleat

- Material: aluminum and stainless steel.

- Standards: 200 x 150 x 200. Can be made according to the desired usage

- Usage: for fastening ropes for the marooned yachts

- Features: solar cells are attached to make it possible to identify things at night. Can provide lighting at night.

- Name: pile cap

- Material: P.E.

- Standards: available in Ø406, Ø508, and Ø610

- Usage: caps to cover the top of steel piles

- Features: aesthetic function for the top side of a steel pile. Can be made in various designs

- Name: pile guide

- Material:stainless steel

- Standards: available in Ø406, Ø508 and Ø610. Can be made according to the usage.

- Usage: fixing of piers

- Features: made of materials that are highly resistant to sea water. Will fasten the pier, and move up and down according to the water levels

- Name: hinge

- Material:stainless steel

- Standards: 190x140 x 20. Can be made according to the usage.

- Usage: connection between piers

- Features: the possible impact to the piers, which could occur when there are the strong waves and ship waves, will be reduced as much as possible.

- Name: fender

- Material:rubber

- Standards: 100 x 100 x L1000, 150 x 130 x L1000

- Usage: protection of the salvage of a marooned yacht

- Features: the possible impact to the piers, which could occur when there are the strong waves and ship waves, will be reduced as much as possible. Protects the salvage of a yacht or a vessel while being marooned, and reduces the possible impact onto the piers.

- Name: Al sheet

- Material:aluminum

- Standards: 50 x 20 (For the design of a pier’s brim). 170 x 23 (For the design of a brim as well as for the access hole for the water supply, electricity)

- Usage: for the design of a brim as well as for the access hole

- Features: the brim of a pier’s upper side can be finished with aluminum, expressing delicacy and design.

- Name: a rest for a life ring

- Material:stainless steel

- Standards: Ø100 x 1100.

- Usage: for the rescue and recovery activities

- Features: made of stainless steel that is highly resistant to sea water. Designs can be expressed according to desired functions.