Dust Analyzer(P-5C)

Product Description The P-5C Particulate monitor performs continuous, non-extractive mass concentration measurements – simply and reliably- in a wide variety of applications Product Feature Measurement range : 1-20,000 mg/Actual m3 Scale range : Dual ranging, user selectable anywhere within the measurement range. Detect limit : 0.5 mg/Am3 Stability : (Zero and Span drift) Short term(2Hr.) – Less than 1% full scale / long term(24Hr.) – Less than 2% full scale Response time : Approximately 1 Seconds Calibration : Internal system automatically performs a low level (Zero) and upscale (Span) cycle at initiated by internal clock or by external data system command (contact closure). External calibration tube provides traceable values for reference calibrations and instrument audits Ambient temperature : -30? to 55? Process gas temperature : To +260? standard, to +375? with high temperature probe option Process gas pressure : To +130mmH2O standard / To +375mmH2O high volume purge blower option Process gas velocity : Instrument operation is independent of gas velocity Power requirements : 110±15 Volts AC, 60Hz, 6A.(220V, 50Hz optional) Output : 4-20mA, 550 ohms maximum resistance Product Specification / Models Only single model : P-5C Application Monitor output emissions – power and recovery boiler in lumber and paper industries. Detect the presence of undesirable materials – in process lines; for example, sulfuric acid mist in chemical processing plants. Did in the design and troubleshooting – to minimize lost product in manufacturing process, such as metals processing plants. Optimum solution for consent decree and compliance assurance monitoring(CAM) applications