Clamp-On Technology make installation very simple. User just attach clamp-on transducers onto pipe. Do not need stop water supply for installation and after service.
In case of pipe change to small or big pipe, use can use existing ultrasonic flowmeter for the new pipe.
Turn-down ratio of Xonic 100 is more than 500:1. Xonic 100 is best flowmeters to check minimum flow during mid-night. Many case, flow in mid-night down to 1 M3/hr for 100mm pipe and Xonic 100 keep accuracy.
Xonic 100 use Cross Correlation technology. So such technology remove most noise from outside, and make Xonic 100 can measure liquids contains heavy air and slurry.
Xonic 100 has large color graphic LCD, and it show flow, total, analog input data (pressure, level, etc), and ultrasonic signal shape, so user can check how flowmeter works in field without oscilloscope as diagnostic functions.
Xonic 100 is dual beam or dual path is basic model. User can use as single channel flowmeter with one pair transducers, and dual channel or dual path flowmeters with two pair transducers.
Features:l Clamp-On Technology make installation very simple. User just attach clamp-on transducers onto pipe. Do not need stop water supply for installation and after service.
l In case of pipe change to small or big pipe, use can use existing ultrasonic flowmeter for the new pipe.
l Turn-down ratio of Xonic 100 is more than 500:1. Xonic 100 is best flowmeters to check minimum flow during mid-night. Many case, flow in mid-night down to 1 M3/hr for 100mm pipe and Xonic 100 keep accuracy.
l Xonic 100 use Cross Correlation technology. So such technology remove most noise from outside, and make Xonic 100 can measure liquids contains heavy air and slurry.
l Xonic 100 has large color graphic LCD, and it show flow, total, analog input data (pressure, level, etc), and ultrasonic signal shape, so user can check how flowmeter works in field without oscilloscope as diagnostic functions.
l Xonic 100 is dual beam or dual path is basic model. User can use as single channel flowmeter with one pair transducers, and dual channel or dual path flowmeters with two pair transducers.
Spec:
Installation
Clamp-On
Principles
AR(Anti-Round) Mode, Transit-Time
Accuracy
±1.0 % single path
±0.5 % dual path
Velocity
±0.02 ~ 12 m/sec
Turn Down Ratio
1000:01:00
Required Straight Run
10D upstream, 5D downstream, single path
7D upstream, 3D downstream, dual path
Output
Two 4-20mA
Two Relays
Input
Two 4-20mA (for pressure, temperature, etc)
Datalogger
8 Mbytes
Display
Large Color Graphic LCD Display
Flow, Total, Input Data, Delta T
Ultrasonic Signal Shape, Frequency
Communication
RS-232C, RS-485
Power
AC110~220V
Enclosure
NEMA 4, IP54
Transducers
Submersible, IP68
Share Clamp-on Ultrasonic Flowmeter in Social Media