AED & Defibrillator

• Product Exterior

Dimensions: 260 x 256 x 70 mm (Width x Length x Height)

LCD: 5inch wide, 480x272 16bit

Weight 2.4㎏ (Including the battery pack and pads)

 • Defibrillator

Operation Type: Dual Mode (semi-automated, manual) External Defibrillator

Output Type: e-cube biphasic (Truncated exponential type) output Energy

AED Mode

• 150J±4J, 200J±6J at 50Ω load for adults

• 50J±2J at 50Ω load for children

Manual Mode (Optional)

• 2J±1J, 3J±1J, 5J±1J, 7J±1J, 10J±1J, 20J±2J, 30J±2J, 50J±2J, 70J±2J, 100J±4J, 150J±4J, 200J±6J at 50Ω load

 • Self Test

Auto Power Self-Test / Real-time Self-Test

Daily / Weekly / Monthly Self-Test

Manual Battery Pack Self-Test (performed when the user inserts the battery pack)

 • ECG Analysis System

Analyzes whether the rhythms of the patient's impedance and ECG require a defibrillation

Measured Impedance Range 25Ω ~ 175Ω 

 • Battery

Battery Type: 12V DC, 111.1V DC, 1.9Ah Li-ion, rechargeable

Capacity: For fully charged new batteries, at least 60 shocks or 3

hours of operation at 25°C (77°F)

Standby Life (After Inserting the Battery)

If stored and managed in accordance with instructions in the document: At least 2 years from the date of installation into the i-PAD CU-SP2

Temperature Ranges for Storage and Use  

Operating Environment:

Temperature: 0°C ~ 43°C (32°F ~ 109°F)

Storage Environment:

Temperature: -20°C ~ 60°C (-4°F ~ 140°F)

 • Electrode

Adult

Electrode Area: 110 cm2

Cable Length: Total 120cm (Internal: 95cm, External: 25cm)

Pediatric

Electrode Area: 50 cm2

 Cable Length: Total 120cm (Internal: 80cm, External: 40cm)

 • Data Storage and Transfer

Data Storage: Saves 3 events on the internal memory (up to 17 hours per event)

SD Card:  Stores the ECG and event data from the device's internal memory through the PC software (CU-Expert).

Bluetooth: Uses Bluetooth to communicate with the Printer or the CUEM1

(ECG transmission device)