What is Espil BSL-10
Espil BSL-10 is based on IPL (Intense Pluses Light) technology which is regarded as the most effective and safest in today’s markets. The FDA’s definition of permanent hair reduction states that after the treatment is Finished a minimum of 30 months without any new growth must be observed. Espil BSL-10 is the most innovative light-based hair removal device for use in the privacy of your own home.
To achieve hair removal, it is necessary not only to destroy the hair but to
destroy the stem cells that create the hair. It is important to understand that
the hair is only a conduit for the light energy, and the target for successful permanent hair reduction is to destroy the stem cells that make the hair follicle. The Espil BSL-10 home hair removal device is a small, portable IPL. The specifications for the device include wavelengths of light from 475 to 1200nm.
Treatment Plan with Espil BSL-10
Treatments should be carried out every 2 – 4 weeks for at least 3 sessions, and up to 7 – 8 if necessary. After 6 months of sessions full results(70 – 90%) should be achieved.
Skin Tone Chart
Select the color below that best matches the color of the skin on the area you are treating. Don’t use Espil BSL-10 on naturally dark skin. Treating dark skin with Espil BSL-10 can result in adverse effects such as burns, blisters, and skin color changes.(hyper- or hypo-pigmentation)
Tips for your first treatment session with Espil BSL-10
You should start with the Low setting for the first time and increase to the Medium or High settings based on your comfort level. Energy level determines the intensity of the Espil BSL-10 light pulse delivered to your skin, from the lowest level(-) to the highest level(+). As energy level increases, so does hair removal results as well as the risk
of possible side effects and complications. You should use a lower setting if you are experiencing pain, the area is flushed, or has blotches.
How To Use
The skin should be shaved, clean, dry and free of any powders, antiperspirants or deodorants.
1. Press the Power On/Off switch to turn Espil BSL-10 on.
2. Shortly after pressing the Power On/Off switch, the Ready Indicator Light will turn on, accompanied by a beep, to indicate that your Espil BSL-10 is ready for its first pulse.
3. Your Espil BSL-10 is automatically set to the lowest energy level.
4. Using firm pressure, apply the Applicator Tip to the skin. Be sure that the skin area you are about to treat is spread evenly and smoothly, and that the Applicator Tip is in full contact with the skin.
5. Press the Pulse Button to emit a pulse. You will then see a flash of light and hear a POP Sound. This is normal light pulse of Espil BSL-10.
6. After emitting a pulse, remove the Applicator Tip from the skin. Espil BSL -10 will recharge for the next pulse.
7. After approx. 4 - 7 seconds the Ready Indicator Light will turn on again, accompanied by a beep, to indicate that your Espil BSL-10 is ready for another pulse.
8. Continue to administer pulses until the desired skin area is fully treated.
Name
Espil BSL-10 IPL Hair Removal System
Technology
Intense Pulses Light ( IPL)
Wavelength
475 – 1200 nm
Max Energy Level
25 j
Spot Size
20 x 30 mm
Life of Lamp
3,000 – 8,000 Shot
A package weight & size
30 x 20 x 11 cm, 2.5 kg
Package Contents
Unit, Lamp Cartridge, AC cord, Goggle, Manual
Share Espil in Social Media