The Cotton Mesh Heating Material is an epoch-making material radiating heat through the electrodes, which have been done their finishing coating works in a vacuum condition, after weaving the Cotton in a lattice shape, utilizing PE, PET and Urethane, and then by twinning it with carbon.
When the anode wire of the Cotton Mesh Heat Radiating Element is connected to the power source, a large number of infrared rays are emitted. These infrared rays are penetrated deep into our body, and shake the molecules in our body more than approx. 2,000 times per minute, and thereby generate heat by itself.
Dependant upon the purpose of their use, the Cotton Mesh Heat Radiating Elements are available in various specific types such as the one designed for heating buildings, and also the one used for heating beddings such as a hot mattress and hot pad, etc., thus they have been produced in such a way that the products can be applied for a wide range of purposes.
In addition, as the product which has been developed by resolving the electrical problems with heating wires and heating films those seen with the existing other products and also by improving safety aspects and durability remarkably, which has been resulted in extending its lifetime semi-permanently and saving heating bills considerably, thereby the Cotton Mesh Heat Radiating Element has been proved to be very economical as well.
Features:1. Cotton Mesh Heat Radiating Element Developed for the first time in the world
Through having the process of weaving the cotton into a lattice shape, twinning it with aqueous carbon and performing insulation coating, the Cotton Mesh Heat Radiating Element of Orientdream Co., Ltd. emits a large amount of the radian heat of the far-infrared, and therefore, heating and warming can be achieved, while the radiant heat of the far-infrared rays penetrate deep into the skin and presents pleasant warming.
2. Able to be applied to all the Products Used for Generating Heat
The Cotton Mesh Heat Radiating Element can be applied to all the products those used for generating heat such as a film heating device for heating buildings, beddings of beds and pads, sauna and hot packs, and also for any products require to have a heating generating element such as a agricultural dryer or industrial products requiring a high temperature-radiating element. It can be produced in various sizes according to the size of weaving, and also available in different kinds of products based on the carbon content, ranging from law temperature-radiating elements to those of high-temperature ones.
3. Emitting 91.0% of Far-Infrared Rays (Certified by Korea Institute of Construction Materials)
The carbon, which is composed of the property of charcoal, is the main component of the Cotton Mesh Heat Radiating Element, and from this a large amount of far-infrared rays is emitted, and when it does so, the radiant heat of the far-infrared rays is create. With the radiant heat such heating and warming are achieve – this is the principal of its heating. Moreover, the far-infrared rays, being the kind of the sunlight wavelength, penetrate deep into the skin and shake the cells so that they are revitalized, and thereby it helps promote metabolism, prevent aging, and activate blood circulation and cellular tissues.
4. It’s the Environmentally Friendly Product that Uses the Clean Energy
Instead of using chemical fuels such as coal or kerosene, particularly in
this era of high oil prices, it uses electricity-the clean energy, therefore, it’s the heating system that helps maintain the environment clean and pleasant without generating any smoke, noise or smell. While it has no concern of having winter ruptures, there’s no need of maintaining a boiler room, taking a trouble of replacing a briquette or refilling of fuels, thus it can be used very conveniently.
5. Its Installation can be done easily and economically
It’s installation cost is cheap as it requires no a high-unit priced plumbing work to do or a boiler needs to be installed while it takes less maintenance cost thanks to its excellent thermal efficiency. Also its installation method is very simple as it allows the installation time shortened because the heat-radiating element is to be installed on an existing concrete floor after just laying down insulation materials on it. At the same time, space heating of the area can be achieved due to the radiant heat of the far-infrared rays.
6. Its Lifetime is Semi-Permanent
Because a molding coating method is applied in producing the product, the coating can be carried out in a vacuum condition, and therefore it is not oxidized nor hardened in a hot temperature and for this reason, its lifetime can be prolonged allowing the use of the product semi-permanently. Besides, in order to preclude the changes of having factors of defects, such as the risk of having sparks due to breakage of insulation caused by cracking of the coatings or by air layers formed, we are producing our Cotton Mesh Heat Radiating Element with performing molding coatings in the mesh-net form of a latticing shape, thus its safety and durability can be strengthened as well.
SPEC
Product Name
Model
Size
Power
consumption(W)
Remarks
Film Heaters
ODP1500
1480
300
±5%
ODP1300
1280
260
ODP1000
980
200
ODP650
630
130
Share Cotton Mesh Heating Material in Social Media